• Nenhum resultado encontrado

Mat. Res. vol.8 número3

N/A
N/A
Protected

Academic year: 2018

Share "Mat. Res. vol.8 número3"

Copied!
4
0
0

Texto

Loading

Imagem

Table 2. Thermal and mechanical properties of Glass and Carbon ibers.
Table 3. Compressive Properties of Plain, Fiber Reinforced Polymer Concrete  and Commercial Concretes.

Referências

Documentos relacionados

The iber in nature (FNAT) showed a higher initial thermal degradation due to the presence of the iber constituents that serve as barriers to initiate its degradation, but the

In the present investigation, carbon iber reinforced aluminium sandwich laminates are fabricated and their properties such as tensile, lexural and impact are studied for their use

Commercial glass iber reinforced-vinyl ester resin composite pipes used in onshore and offshore utilities were exposed to the action of luids that could normally come into contact

According to the results, while iber reinforcement leads to a decrease in compressive strength, J-integral calculations at maximum load for the different notch root radii

The object of this study was to evaluate the lexural strength of glass iber reinforced polyurethane composites under variable displacement rates.. Specimens with identical geometry

In the present work the ballistic performance of MASs using coir iber mantle, Figure 1, reinforced epoxy composites, as second layer, was for the irst time compared to similar

This work presents ab-initio predictions of elastic constants and thermal properties for 2.5D carbon iber reinforced carbon-silicon carbide hybrid matrix composites, by

of hygrothermal exposure, ultraviolet (UV) radiation, salt spray and thermal shock aging on the thermomechanical behavior of glass iber reinforced by poly (ether-imide)