New Trends and Perspectives
J.F. Silva Gomes, Mário A.P. Vaz
Editors
Proceedings of the 15th International Conference on Experimental
Mechanics, Porto, Portugal, 22-27 July 2012
ICEM15
EXPERIMENTAL MECHANICS
ICEM15
EXPERIMENTAL MECHANICS
(NEW TRENDS AND PERSPECTIVES)
Editors
J.F. Silva Gomes, Mário A.P. Vaz
Edições INEGI
Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
Tel:+351 22 957 87 10; Email: inegi@inegi.up.pt
www.inegi.up.pt
July, 2012
ISBN: 978-972-8826-25-3
Legal D.N: 295712/12
Printed by:
LusoImpress (Grupo Claret)
Rua Venceslau Ramos, s/n - 4430-929 Avintes, Portugal
Tel:+351 22 787 73 20; Fax:+351 22 787 73 29
Cover design by Nuno V. Ramos (INEGI)
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical, optical, recording, or otherwise, without the priorwritten permission of the publisher.
Organizing Committees xxxix ICEM15 Tracks and Symposia xli
Acknowledgments xlii
A. KEYNOTE PAPERS 1
3815-KP MULTIFUNCTIONAL NANO-TAILORED ADHESIVES FOR SELF-HEALTH MONITORING OF AIRCRAFT. Shaker A. Meguid.
3
3827-KP EXPERIMENTAL MECHANICS IN AERONAUTICS: BEHIND THE LEGACY 500 PRODUCT DEVELOPMENT. Gustavo B. Guimarães.
5
3820-KP HIGH-SPEED, HIGH ACCURACY AND LOW COST SHAPE MEASUREMENT SYSTEMS USING PHASE ANALYSIS OF GRATING PROJECTED BY MULTI-LINE LED LIGHT SOURCES. Yoshiharu Morimoto, Akihiro Masaya, Motoharu Fujigaki, Daisuke Asai.
7
3819-KP THE OPTICAL METHOD OF CAUSTICS FOR THE SOLUTION OF FRACTURE MECHANICS PROBLEMS. Emmanuel Gdoutos.
9
2649-KP THE MEASUREMENT AND INTERPRETATION OF MATERIAL AND STRUCTURALBEHAVIOURS IN MICRO LATTICE STRUCTURES
MANUFACTURED USING SELECTIVE LASER MELTING. Robert A.W. Mines, Rafidah Hasan.
11
3821-KP SPEEDING UP CREEP TESTS OF NOVEL HIGH TEMPERATURE COMPOSITES. Sergei T. Mileiko.
13
3045-KP FORENSIC DETERMINATION OF RESIDUAL STRESSES FROM FRACTURE SURFACES. Michael B. Prime, Adrian T. DeWald, Michael R. Hill.
15
3825-KP EXPERIMENTAL MECHANICS IN BIOMEDICAL ENGINEERING AND HUMAN ENHANCEMENT. Mário A.P. Vaz.
17
3826-KP MECHANICAL CHARACTERIZATION OF STRUCTURES - FROM THE
MICROSCOPIC LEVEL OF MATERIALS UP TO THE STRUCTURAL LEVEL OF BUILDINGS. J. Füssl, K. de Borst, B. Pichler, J. Eberhardsteiner.
19
3831-KP HOW TO MEASURE THE REAL FRACTURE TOUGHNESS IN BRITTLE
MATERIALS? PAST, PRESENT AND FUTURE TECHNIQUES. José Ygnacio Pastor.
21
3823-KP EXPERIMENTAL DYNAMIC ANALYSIS IN EARTHQUAKE ENGENEERING RESEARCH. Alfredo Campos Costa.
23
B. TRACKS / MAIN TOPIS 25
TRACK_A: TESTING AND DIAGNOSTICS 27
2642 A TENSILE CIRCULAR RING METHOD FOR MEASURING YOUNG'S MODULUS OF THIN FLEXIBLE MULTI-LAYERED MATERIALS. Atsumi Ohtsuki.
29
2866 COMPLEX YOUNG MODULUS FOR RUBBERCORK COMPOSITES. I. Guelho, L. Reis, M. Fontul.
2645 NON DESTRUCTIVE INVESTIGATION OF DEFECTS IN COMPOSITE
STRUCTURES BY THREE INFRARED THERMOGRAPHIC TECHNIQUES. Elodie Péronnet, Marie-Laetitia Pastor, Richard Huillery, Olivier Dalverny, Sébastien Mistou, Hélène Welemane.
33
2674 DAMAGE ASSESSMENT IN COMPOSITE MATERIALS WITH NEW THERMAL METHODS. Umberto Galietti, Davide Palumbo, Calia Gianfranco.
35
2778 USE OF ACOUSTIC EMISSION TO DISCRIMINATE DAMAGE MODES IN COMPOSITE-ANTENNA-STRUCTURE DURING BUCKLING LOADING. Pongsak Nimdum, Jacques Renards.
37
2689 LOCAL MOISTURE CONTENT AND SWELLING STRAIN IN WOOD
INVESTIGATED BY NMR AND X-RAY MICROTOMOGRAPHY. Sabine Caré, Michel Bornert, Francois Bertrand, Nicolas Lenoir.
39
2954 EXPERIMENTAL STUDY OF THE SHRINKAGE OF EPOXY COATING. Gaili Zhou, Lin-an Li, Shibin Wang, Haikun Jia, Shuijiao Li.
41
2800 AN EXPERIMENTAL METHOD TO MEASURE THE TIRE ROLLING RESISTANCE COEFFICIENT OF AN ULTRA-EFFICIENT VEHICLE. Pedro F.V. Carvalheira.
43
3817 ND SMALL DEFECTS DETECTION OF GFRP LAMINATES USING PULSED AND LOCK-IN THERMOGRAPHY. Alessio Carofalo, Vito Dattoma, Simone Giancane, Fania Palano, Francesco W. Panella.
45
2920 A MODEL FOR THE CALCULATION OF CAR CO2 EMISSIONS AND FUEL
CONSUMPTION IN THE NEW EUROPEAN DRIVING CYCLE. Pedro F.V. Carvalheira.
47
2609 INTROSPECTIVE OF DAMAGE DETECTION METHODS BASED ON NATURAL FREQUENCIES CHANGES AND SENSITIVITIES. Arcangelo Messina, Giacomo Mantriota.
49
2613 NONLINEAR IMPACT RESONANT ACOUSTIC SPECTROSCOPY TO DISCERN MECHANICAL DAMAGE IN CEMENT BASED MATERIALS. Jesús N. Eiras, John S. Popovics, Mª Victoria Borrachero, José Monzó, Jordi Payá.
51
2637 IDENTIFICATION OF DAMAGED ZONE IN COMPOSITE MATERIALS USING DISPLACEMENT FIELD MESUREMENTS. Elodie Peronnet, Olivier Dalverny, Hélène Welemane, Sébastien Mistou.
53
2705 NATURAL VIBRATION LOADING FOR DAMAGE ASSESSMENT USING THERMOELASTIC STRESS ANALYSIS. Richard K. Fruehmann, Janice M. Dulieu-Barton, Julien Peton-Walter, Lionel Benaben.
55
2710 FINITE ELEMENT MODELS FOR THE ONSET AND GROWTH OF DELAMINATION IN CFRP LAMINATES. Jorge Bonhomme, Victoria Mollón, Ahmed M. Elmarakbi, Jaime Viña, Antonio Argüelles.
57
2788 ANALYSIS OF THE INFLUENCE OF THE TEMPERATURE IN THE PROCESS OF DELAMINATION UNDER STATIC AND DYNAMIC SOLICITATION OF AN UNIDIRECCIONAL CARBON-EPOXY COMPOSITE. P. Coronado, J. Viña, V. Mollón, A. Argüelles, I. Viña.
59
2615 INFLUENCE OF ASSEMBLY TECHNIQUES ON THE STATIC STRENGTH OF INTERFERENCE FIT AND ADHESIVELY BONDED PIN AND COLLAR SPECIMENS. Dario Croccolo, Massimiliano DeAgostinis, Pier Franco Mauri, Nicolo Vincenzi.
61
2657 THERMAL ANALYSIS OF ADHESIVES DGEBA (DIGLYCIDYL ETHER OF
BISPHENOL A) AND ITS INFLUENCE ON RESISTANCE OF POLYMERIC REPAIRS AND BONDED JOINTS. Juliana P.B. Souza, Kenji R. Osanai, João M.L. Reis.
63
2696 EXPERIMENTAL ANALYSIS OF THE TEMPERATURE-DEPENDENT BEHAVIOUR OF A DUCTILE ADHESIVE UNDER TENSILE/COMPRESSION-SHEAR LOADS. Claudiu Badulescu, Jean Yves Cognard, Romain Créac'hcadec, Pierre Védrine.
2766 EXPERIMENTAL OPTIMIZATION OF SINGLE-LAP AND T-PEEL JOINTS BY BONDING, WELDING AND HYBRID JOINING. Raul D.S.G. Campilho, Pedro F.P. Afonso, Mariana D. Banea, Lucas F.M. Silva.
67
2768 OPTIMIZATION OF SINGLE-LAP JOINTS BY SLOTTING AND CHAMFERING THE ADHERENDS AT THE OVERLAP. Nuno F.Q.R. Ribeiro, Raul D.S.G. Campilho, Arnaldo M.G. Pinto.
69
2983 PRELIMINARY ANALYSIS OF FSW PARAMETERS OPTIMIZATION USING THE TAGUCHI METHOD - TEMPERATURE RESPONSE. E.R. Libanio, R.R. Rodriguez, M.A.V. Figueiredo, Pedro M.G.P. Moreira.
71
3743 BEHAVIOUR OF WELDED REVERSE CHANNEL JOINT COMPONENTS OF I BEAM TO TUBULAR COLUMNS CONECTIONS. Luís Magalhães, Carlos Rebelo, Sandra Jordão.
73
2639 AN INVESTIGATION INTO THE FAILURE MECHANISMS AT THE ONSET OF NECKING IN DP600 STEEL. Hassan Ghadbeigi, Christophe Pinna, Steven Celotto.
75
2661 APPLICATION OF THE ELASTIC MODULUS DEGRADATION TECHNIQUE ON THE TI-6AL-4V TITANIUM ALLOY FOR CDM MODELS. Nima Allahverdizadeh, Andrea Manes, Marco Giglio.
77
2841 DETERMINATION OF CUTTING EDGE SEPARATION POINT DURING
MICROMACHINING OF HIGHLY ELASTIC MATERIALS. Nathaniel Eckman, Anil Saigal, Thomas P. James.
79
2918 VARIATION OF TENSILE CHARACTERISTIC AND MECHANICAL PARAMETERS OF POWER ENGINEERING STEELS DUE TO CYCLIC LOADING. Zbigniew L. Kowalewski, Tadeusz Szymczak.
81
2975 ON THE STUDY FOR ACCURATE DETERMINATION OF FLOW CURVE USING BULGE TEST. Bruno Martins, Abel D. Santos, Pedro Teixeira.
83
3021 POLAR SCAN TECHNIQUE FOR MATERIAL CHARACTERIZATION AND IDENTIFICATION OF NEW OPERATING REGIMES. Mathias Kersemans, Wim Van Paepegem, Diederik Van Nuffel, Geert Luyckx, Ives De Baere, Filip Zastavnik, Jun Gu, Hugo Sol, Koen Van Den Abeele, Joris Degrieck.
85
3053 A THERMOELASTIC STUDY OF AN ALUMINIUM ALLOY ARM OF AN
HELICOPTER COMPONENT IN NON ADIABATIC CONDITIONS. Antonio Salerno, Stefano Desiderati.
87
3130 AN EXPERIMENTAL AND NUMERICAL STUDY OF NECKING INITIATION IN BIAXIAL TENSILE TEST. Fethi Abbassi, Mondher Nasri, Romain Brault, Sebastien Mistou, Ali Zghal.
89
3150-IP INVERSE ANALYSIS FOR CONSTITUTIVE PARAMETERS IDENTIFICATION OF METAL SHEETS USING A SINGLE TEST. José V. Fernandes, Pedro A. Prates, Marta C. Oliveira, Nataliya A. Sakharova (Invited Paper).
91
3214 ASSESSMENT OF MECHANICAL SHEAR RESPONSE USING DIGITAL IMAGE CORRELATION. Carlos Leitão, Altino Loureiro, Dulce Rodrigues.
93
2943 FUNCTION OF SYNCHRONIZER SYSTEMS AT LOW TEMPERATURES. K. Stahl, B.R. Höhn, H. Pflaum, M. Wirth.
95
2969 PERFORMANCE TEST of CABLE-STAYED BRIDGE LABORATORY MODEL WITH CABLE DAMAGED. Ou Yang, Hui Li, Jinping Ou.
97
2564 REAL TIME VIDEO IMAGING OF CHEMICALLY TRIGGERED CRACK GROWTH IN MICRO-MACHINED ACRYLIC POLYMER (PMMA) SAMPLES. A.M.N. Lima, C.E. Precker, A.G.S. Barreto Neto, L.R.S. Araujo, H. Neff.
99
2636 INFLUENCE OF BIAXIAL TENSILE LOAD RATIOS ON THE STRESS FIELDS NEAR MODE-I CRACK-TIP BY PHOTOELASTIC HYBRID METHOD. Akira Shimamoto, Hiroshi Ohkawara, Tetsuya Nemoto, Ryo Kubota.
2876 MEASUREMENT OF DUCTILE CRACK EXTENSION IN SINGLE EDGE NOTCH TENSILE SPECIMENS. Matthias A. Verstraete, Stijn Hertelé, Wim De Waele, Rudi Denys, Koen Van Minnebruggen.
103
2915 STRESS INTENSITY FACTORS BY THE CRACKED BRAZILIAN DISC TEST: EXPERIMENTAL ASSESSMENT OF AN ANALYTIC SOLUTION. Stavros K. Kourkoulis, Christos F. Markides, Alexandros Levantis.
105
2867 NUMERICAL SIMULATION OF STRESS INTENSITY FACTOR UNDER BENDING LOADS BASED ON THE THERMOELASTIC STRESS ANALYSIS. Yui Izumi, Minami Takeda, Hirotaka Tanabe, Tohru Takamatsu, Takahide Sakagami.
107
2648 DIGITAL IMAGE PROCESSING APPLIED TO THE ANALYSIS OF GEOMETRY OF THE TEST PIECE CHARPY. José R.C. Campos, Valdezio J.P. Souza, Luciano T.A. Bosshard, Francisco I.B. Cardoso.
109
2555 INFLUENCE OF THERMAL OXIDATION ON LOW-CYCLE FATIGUE DAMAGE BEHAVIOUR OF THERMAL BARRIER COATED NI-BASE SUPERALLOY. Yasuhiro Yamazaki, Fukanuma Hirotaka, Ohno Naoyuki.
111
2691 DESIGN AND IMPLEMENTATION OF A FATIGUE TEST RIG FOR FLUCTUATING LOADING IN BENDING AND TORSION. Brecht Van Hooreweder, David Moens, Rene Boonen, Paul Sas.
113
2737 FAST ESTIMATION OF FATIGUE BEHAVIOR OF HETEROGENEOUS WELDED JOINT BY THERMOGRAPHIC METHOD. Thomas Paris, Damien Colas, Charline Touvrey.
115
3838 FATIGUE CRACK GROWTH TESTS IN RAILWAY WHEEL AND RAIL STEELS. Daniel Peixoto, Luís A. Ferreira, Paulo M.S.T. Castro.
117
2861 FATIGUE IN CUSTOM 465 STAINLESS STEEL FOR AERONAUTIC APPLICATION. H.J.C. Voorwald, R.G. Bonora, M.O.H. Cioffi.
119
3075 FATIGUE TEST BENCH FOR CRANKSHAFTS. José Huertas, Natalia Navarrete. 121 3123 EXPERIMENTAL AND FEM ANALYSIS FOR BIAXIAL STATIC AND FATIGUE
BEHAVIOUR OF THE ALUMINIUM STRUCTURES OF ROLLING STOCK'S SEATS. Enrico Armentani, Angela Pozzi, Raffaele Sepe.
123
2626 NONDESTRUCTIVE CHARACTERIZATION OF METALLIC MATERIAL
DEGRADATION USING NONLINEAR ULTRASONICS. Guoshuang Shui, Yuesheng Wang.
125
2665 A NOVEL SOUND BRUSH APPROACH FOR NOISE SOURCE IDENTIFICATION. Karl Janssens, Pieter Aarnoutse, Chiel Verhoeven, Herman VanderAuweraer, Filip Deblauwe.
127
2684 3D SCANNING LASER DOPPLER VIBROMETRY FOR STRUCTURAL HEALTH MONITORING USING ULTRASONIC SURFACE WAVES. Marco Fritzsche, Jochen Schell, Wolfgang Ochs, Mirko Neumann, Rolf Lammering.
129
2762 PRACTICAL ASPECTS IN MEASURING VIBRATION DAMPING OF MATERIALS. Joachim Vanwalleghem, Ives De Baere, Mia Loccufier, Wim Van Paepegem.
131
2940 COMPARISON OF VIBRATION BASED COHERENT COMPOSITE SPECTRUM WITH NON-COHERENT COMPOSITE SPECTRUM FOR MACHINE CONDITION MONITORING. Keri Elbhbah, Jyoti K. Sinha.
133
3850 USE OF MAGNETO ELASTIC EFFECT FOR STRESS MONITORING AND DEFECT DETECTION IN STEEL STRANDS. Cláudia Lemos, Américo Dimande, Armindo Lage, A.M. Sarmento, Elsa Caetano, Joaquim Figueiras.
135
2755 SIMPLE APPROACH TO RESIDUAL STRESS DEPTH PROFILING BY X-RAY DIFFRACTION USING CONVENTIONAL PSI OR OMEGA GEOMETRIES. Alexei Yu. Kuznetsov, Rodrigo S. Neves, Luis P. Linares, Tiago L. Oliveira, Erica G. Gravina, T.K. Hirsch, C.A. Achete.
2877 INFLUENCE OF THE RESIDUAL STRESSES RELIEF PARAMETERS BY MECHANICAL VIBRATION TREATMENT IN WELDED JOINTS. Maria Cindra Fonseca, Tatiane Chuvas, Daniel Castello.
139
3010 MEASUREMENT OF THERMAL RESIDUAL STRESSES IN A CURVED-SHAPE COMPOSITE PART. Fathollah Taheri-Behrooz, Akbari R. Saeed, Mahmood Shokrieh.
141
3015 RESIDUAL STRESSES AND HEAT TRANSFER PROPERTIES OF A SERIES OF OXIDIZED AND UNOXIDIZED VEGETABLE OILS IN COMPARISON WITH PETROLEUM OIL-BASED QUENCHANTS. Ester C. Sousa, Diego S. Schicchi, Analía Gastón, Gustavo S. Sarmiento, George E. Totten, Lauralice C.F. Canale.
143
3100 RESIDUAL STRESSES PROFILES OF CLADDED AUSTENITIC STAINLESS STEEL BY INCREMENTAL HOLE DRILLING METHOD. Maria J. Marques, António Batista, Luís Coelho, João P. Nobre, Altino Loureiro.
145
3115 PHOTOELASTIC MEASUREMENT OF RESIDUAL STRESS OF LIGHT BULBS FOR AUTOMOBILES WITH LIGHTING. Shinichi Suzuki, Taiga Murai, Shouhei Nishikita, Youta Katayama.
147
3033 SIMULATION AND ANALYSIS OF CRACKED BEAMS USING FINITE ELEMENT ANALYSIS AND EXPERIMENTAL MODAL ANALYSIS METHODS. Sulaymon Eshkabilov, Kudrat Kutlimuratov, Golibjon Sharipov, Hamdam Jumaniyazov.
149
3120 APPLICATION OF CONTINUOUS WAVELET TRANSFROM IN EXPERIMENTAL AND ANALYTICAL ASSESSMENTS ON VIBRATION-BASED HEALTH
MONITORING OF A CIRCULAR CYLINDRICAL SHELL. Firooz Bakhtiari-Nejad, Seyed M.M. Bideleh.
151
2666 FULL VEHICLE VALIDATION OF OPAX IN COMPARISON TO TRADITIONAL TPA METHODS. Karl Janssens, Pieter Aarnoutse, Laurent Britte, Filip Deblauwe, Peter
Gajdatsy, Tommaso Tamarozzi.
153
2617 AUTOMATIC CLASSIFICATION OF ROTATING MACHINERY FAULTS USING FOURIER DESCRIPTORS AND NEURAL NETWORKS. A. Oulmane, Aouni A. Lakis, Njuki W. Mureithi.
155
3107 EXPERIMENTAL REANALYSIS OF A CONSTRUCTION OF ROTARY EXCAVATOR. Nataša Trišović, Taško Maneski.
157
2670 EVALUATION OF STATIC STRESS IN PLATE BY IMPACT SOUND. Tsutomu Yoshida, Yuuta Takahashi, Takeshi Watanabe.
159
2751 DYNAMIC MATERIAL PROPERTIES AND CONSTITUTIVE EQUATIONS FOR ALUMINIUM AND MAGNESIUM ALLOYS. Peixinho, Nuno.
161
2916 THE EFFECT OF EXTERNAL DYNAMIC LOADS ON THE LIFETIME OF ROLLING ELEMENT BEARINGS: EXPERIMENTAL STUDY. W. Jacobs, R. Boonen, P. Sas, D. Moens.
163
2953 MONITORING DYNAMIC CHARACTERISTICS FOR A HIGH-RISE STRUCTURE UNDER DIFFERENT LOAD ENVIRONMENTS. H. Li, Z.R. Lu, J.K. Liu.
165
3836 RAILWAY TRAFFIC: VIBRATION MEASUREMENTS PERFORMED IN THE RAILWAY LINE MARVILA - ORIENTE. João Manso, Jorge Gomes, João Marcelino.
167
2656 DESIGNING ELECTRIC VEHICLE EXTERIOR SOUND AND SOUND SOURCE DESIGN FOR INCREASED SAFETY. Herman VanderAuweraer, Karl Janssens, Danilo Sabbatini, Koen VanSant, Filip Deblauwe.
169
2777 DETERMINING LIFE SPAN OF THE ELECTROHYDRAULIC VALVES. Cristian Soimaru, Daniel Buzea, Bogdan Muntean, Atanasiu C. George.
171
2821 IMPLICATIONS OF STRUCTURAL DISCONTINUITIES FOR WATER COUPLED NDT AND SHM: EXPERIMENT AND MODELING. Mathias Kersemans, Koen Van Den Abeele, Wim Van Paepegem, Joris Degrieck.
173
2882 APPLICATION OF FUZZY LOGIC (FL) IN DIAGNOSIS OF ROTATING MACHINES. Fateh Harrouche, Ahmed Felkaoui, Hocine Feniniche, Ishak Touafek.
TRACK_B: SURFACE AND INTERFACE ENGINEERING 177
2719 FOMATION AND MECHANICAL PROPERTIES OF ISLAND-LIKE
NANOSTRUCTURED TITANIUM NITRIDE FILM BY ION BEAM ASSISTED DEPOSITION. Masanori Nakatani, Takuya Ohsawa, Satoshi Hanaki, Hitoshi Uchida.
179
3834 TRIBOLOGICAL STUDY OF TI6AL4V COATED WITH AMORPHOUS CARBON FILMS OBTAINED BY ELECTRODEPOSITION. Tiago A.C. Falcade, Leonardo M. Antonini, Tobias E. Schmitzhaus, Célia F. Malfatti.
181
2735 HEAT TREATMENT OF CERAMIC COATED STEEL BY SCANNING LASER.
Hirotaka Tanabe, Keiji Ogawa, Takuya Saraie, Yui Izumi, Mitsuhiro Gotoh, Hideki Hagino, Takuto Yamaguchi, Tohru Takamatsu, Heisaburou Nakagawa.
183
2749 A MICRO SCALE INVESTIGATION OF CONTACT STRESS IN FUNCTIONALLY GRADED COATING. Romik Khajehtourian, Saeed Adibnazari, Samaneh Tashi.
185
3218 WEAR MODELING OF COATED SPHERES IN STICK-SLIP OR GROSS SLIDING. Daniel J.S. Nélias, Benjamin Fulleringer.
187
3046 TRIBOLOGICAL BEHAVIOUR OF GRAPHENE NANOSHEETS AS LUBRICANT ADDITIVE. Vicenzo D'Agostino, Adolfo Senatore, Vicenzo Petrone, Paolo Ciambelli, Maria Sarno.
189
2603 A WIDE BAND UNDERWATER STRONG ACOUSTIC ABSORBING MATERIAL. Yuren Wang, Heng Jiang, Meng Chen, Yafei Feng.
191
2712 SUBSPACE-BASED EXPERIMENTAL MODEL IDENTIFICATION AND ACTIVE DAMPING OF PIEZOELECTRIC STRUCTUES. Tamara Nestorovic, Miroslav Trajkov.
193
3058 INFLUENCE OF PISTON SKIRT PROFILES ON TRIBOLOGICAL PERFORMANCE IN PISTON ELASTOHYDRODYNAMIC LUBRICATION. Miloud T. Abbès, Patrick
Maspeyrot, Mohamed Hajjam, Mohamed Bembrik.
195
2980 INFLUENCE OF WELDING THERMAL CYCLING ON THE JOIN PROPERTIES OF S 700MC STEEL TREATED USING THERMOMECHANICAL METHOD. Jacek Górka.
197
2840 FATIGUE IMPROVEMENT OF WELDED ELEMENTS BY ULTRASONIC PEENING. Yuri F. Kudryavtsev, Jacob Kleiman.
199
2716 OPTIMAL PLACEMENT OF PIEZOELECTRIC ACTUATORS AND SENSORS FOR SMART STRUCTURES. Miroslav Trajkov, Tamara Nestorovic.
201
TRACK_C: CIVIL ENGINEERING APPLICATIONS 203
2627 EXPERIMENTAL AND NUMERICAL ANALYSIS OF IMPACT ROLLER ON CLAY OVERLAYING SAND. Bijan Bastaee, Mansour Parvizi.
205
2632 CREATION OF ARTIFICIAL GROUND BY RECYCLING TSUNAMI SLUDGE. Hiroshi Takahashi, Tomoaki Satomi, Masato Mori.
207
2634 INVESTIGATION ON CHARACTERISTICS OF SOIL ADHESION TO METALLIC MATERIAL SURFACE AND SOIL ANIMAL'S CUTICLE. Tomoaki Satomi, Haruya Nihei, Hiroshi Takahashi.
209
2672 MONITORING OF SOIL MOISTURE AND GROUNDWATER LEVEL USING AN EMBEDED HIGH-FREQUENCY ULTRASONIC DETECTOR FOR PREDICTION OF SLOPE FAILURES. Nobutaka Hiraoka, Takeshi Mishina, Takehiro Kurohara, Katsuhiko Tanaka, Kazunari Sako, Ryoichi Fukagawa, Asako Togari, Hiroyuki Morishima, Makoto Shimamura.
211
2888 THE MECHANICAL BEHAVIOURS OF TWO CALCAREOUS AND SILICEOUS SANDS: AN EXPERIMENTAL STUDY. Habib Shahnazari, Hossein Salehzadeh, Reza Rezvani, Mohammad A. Tutunchian.
213
3086 DYNAMIC RESPONSE OF LAYERED SATURATED SOIL SUBJECT TO
UNDERGROUND MOVING LOADS. Yu-Qin Ding, Kuang-Dong Xiao, Chu-Yang Liu.
3094 DETERMINATION OF SOIL TRANSFER FUNCTION THROUGH FWD
MEASUREMENTS. Jacopo Ciambella, Piero Lattanzi, Claudio Ottaviani, Achille Paolone.
217
3122 FAILURE EVOLUTION OF ROCKS UNDER INCLINED SHEAR TEST ASSOCIATED WITH NONDESTRUCTIVE TECHNIQUE OF ACOUSTIC EMISSION. Hung-Wei Liu, Wei-Chih Chen, Li-Hsien Chen, Yao-Chung Chen.
219
3134 DETERMINATION OF VIRTUAL COHESSION IN SEMI-SATURATED SAND BY CENTRIFUGE MODELLING. Mansour Parvizi, Hosseien Salehzade, Hooman Zehtab.
221
3137 SOIL SAND BEHAVIOUR BY IMPACT LOAD. Mehr Angiz Qafari, Mansour Parvizi, Mohammad Sedghi, Hossine Salahzadah.
223
3139 EVALUVATION OF WAK TEST METHOD IN THE SOIL. Mohammad Sedghi, Mansour Parvizi, Hossine Salahzadah, Islam Rahmanii.
225
2611 A TRANSPORT TECHNIQUE OF MICROBES FOR SOIL IMPROVEMENT USING MICROBIAL PRECIPITATION OF CARBONATES. Masaharu Fukue, Shin-ich Ono, Yoshio Sato, Izumi Sakamoto, Takayoshi Iwata.
227
2761 EXPERIMENTAL TESTS ON A FUSION TECHNIQUE WITH MONITORING AND REINFORCEMENT METHOD FOR RAINFALL-INDUCED SLOPE FAILURES. Toru Danjo, Kazunari Sako, Naoto Iwasa, Yoshitada Omura, Ryoichi Fukagawa.
229
3136 THE DETERMINATION OF REINFORCEMENT FORCE AT THE EMBANKMENT RELIED UPON PILE BY FINITE ELEMENTS. Mansour Parvizi, Arman Barani, Eman Barani.
231
3138 WAVE PROPAGATION SYSTEM OF SOIL SAND BEHAVIOUR BY IMPACT LOAD. Mehr Angiz Qafari, Mansour Parvizi, Mohammad Sedghi, Hossine Salahzadah.
233
3141 VERTICAL DYNAMIC STRESS IN THE SOIL BY EXPERIMENTAL AND
NUMERICAL METHODS. Mohammad Sedghi, Mansour Parvizi, Hossine Salahzadah, Sadgh Bakhtayari.
235
3164 HORIZONTAL DYNAMIC STRESS IN THE SOIL BY EXPERIMENTAL AND NUMERICAL METHODS. Mansour Parvizi, Hossine Salahzadah, Islam Rahmanii, Sadgh Bakhtayari.
237
3162 RELATIVE OF SOIL STIFFNESS WITH DENSITY. Mehr Angiz Qafari, Mansour Parvizi, Hossine Salahzadah, Mohammad Sedghi.
239
3163 REVIEW OF ANALYTICAL MODELS OF DYNAMIC COMPACTION. Mehr Angiz Qafari, Mansour Parvizi, Hossine Salahzadah, Mohammad Sedghi.
241
3117 GEOTECHNICAL STUDY ON THE BUILDING LAND OF THE HISTORICAL AREA OF VIGO CITY. I.C. Garcés-Navarro, C. Fidalgo, M.R. Currás, J.L. Legido, J. García.
243
3185 PIPING UNDER WEIR RESTING ON THE YASUJ EARTH DAM. Mohammad Sedghi, Mansour Parvizi, Araf Behgam, Mehr A. Qafari.
245
3761 A TRAVELLING SAND PLUVIATOR TO RECONSTRUCT LARGE SOIL
SPECIMENS. Fernando Oliveira, Alexandre Freitas, Paulo Morais, Bruno Mendes, Ana T. Carvalho, João B. Serra.
247
2651 EFFECT OF CEMENT GRAINS ON THE TRIBOLOGICAL BEHAVIOR OF FRESH CONCRETE. Samir Bouharoun, Nordine Leklou.
249
2698-IP INFULENCE OF LOADING FREQUENCY ON THE COMPRESSIVE FATIGUE BEHAVIOR OF PLAIN AND FIBER-REINFORCED CONCRETES. Gonzalo Ruiz, Arthur Medeiros, Xiao Xin Zhang (Invited Paper).
251
2704 LOADING RATE EFFECT ON THE FRACTURE BEHAVIOR OF STEEL FIBER-REINFORCED CONCRETE. XiaoXin Zhang, Gonzalo Ruiz, Adris AbdElazim, Zhongliang Chang.
253
2721 STRENGTHENING OF VAULTS AT THE INTRADOS BY FIBER COATING, COMPOSITE MATERIALS AND SHOTCRETE. Maamoun Saade, Chafika Djelal, Stephan Kesteloot, Lotfi Hamitouche, Idriss Benslimane.
2732 DEVELOPMENT OF A NEW DEMOULDING PROCESS BASED ON CONCRETE POLARIZATION. N. Goudjil, Yannick Vanhove, Chafika Djelal, Hassina Kada.
257
3276 CONTRIBUTION TO THE MODELISATION OF THE ANISOTROPIC AND
UNILATERAL DAMAGE OF THE CONCRETE. Ourdia B.C. Chaouche, Youcef Labadi, Hannachi N. Eddine.
259
2621 ANALYTICAL METHOD FOR REINFORCEMENT OF INTERMEDIERE CRACK USING THE COHESIVE ZONE MODEL. Khamis Hadjazi, Zouaoui Sereir.
261
2785 HYGRO-MECHANICAL BEHAVIOR OF VEGETABLE CONCRETE MATERIALS: INFLUENCE OF THE INTER-PARTICULAR POROSITY. Sabine Caré, Aicha Lakehal.
263
2811 TOUGHNESS FACTOR OF POLYPROPYLENE FIBER REINFORCED CONCRETE IN AGGRESSIVE ENVIRONMENT. Raimundo E. Vasconcelos, Syme S. Queiroz, Itamar Ferreira, Marco A. Carnio, Andre Y. Uehara.
265
3808 A MECHANICAL BEHAVIOUR OF CONCRETE ELABORATED BY SUSTITUTION OF 30% OF COARSE AGREGATES BY LIMESTONE. Saida Kitouni, Abderrahim Laribi, Hacene Houari.
267
2799 RELATIONSHIP BETWEEN HUMAN BEHAVIOR AND THERMAL COMFORT IN A HOUSING ESTATE IN BRAZIL. Denise de S.C. Nascimento, Henor A. Souza.
269
2810 EXPERIMENTAL CHARACTERIZATION OF POMBALINOS "FRONTAL" WALLS CYCLIC BEHAVIOUR. Ana M.N. Gonçalves, João G. Ferreira, Luís Guerreiro, Fernando Branco.
271
2955 COMPARATIVE ANALYSIS OF RC IRREGULAR BUILDINGS DESIGNED ACCORDING TO DIFFERENT SEISMIC DESIGN CODES. Jaime Landingin, Hugo Rodrigues, Humberto Varum, António Arêde, Aníbal Costa.
273
3829 VIBRATION CONTROL OF SINGLE FLOOR SEISMICALLY EXCITED STRUCTURE USING ACTIVE MASS DAMPER. Abdul Qadir Bhatti, Humberto Varum.
275
2965 MAINTENANCE OF INTERIOR WALLS OF BUILDINGS SUPPORTED ON VIRTUAL REALITY TECHNOLOGY. Alcínia Z. Sampaio, Augusto Gomes, Daniel Rosário.
277
2853 FLOATING TRACK SLAB SYSTEMS FOR REDUCING GROUND-BORNE NOISE AND VIBRATION FROM RAIL VEHICLES. Richard A. Carman.
279
3008 INSTRUMENTATION OF A METALLIC RAILWAY BRIDGE AND
IMPLEMENTATION OF A DYNAMIC MONITORING SYSTEM FOR LOCAL FATIGUE ANALYSIS. Carlos Moutinho, Fernando Marques, Álvaro Cunha.
281
3747 UPDATING AND VALIDATION OF THE DYNAMIC MODEL OF A RAILWAY VIADUCT WITH PRECAST DECK. Joel Malveiro, Diogo Ribeiro, Rui Calçada.
283
3184 DAMAGE CAUSED BY TRAFFIC ON AN RC ROAD BRIDGE. Martin Pircher, Bernhard Lechner, Rui Matos, Carlos Rebelo.
285
3078 STRUCTURAL MONITORING OF A WIND TURBINE STEEL TOWER. Carlos Rebelo, Rui Simões, Rui Matos, Luis Simões Silva, Milan Veljkovic, Martin Pircher.
287
3719 VIBRATION ANALYSIS OF A LAMINATED COMPOSITE RECTANGULAR PLATE IN CONTACT WITH A BOUNDED FLUID. Korosh Khorshidi, Alireza Nezam-Abadi, Nahid Jafarian.
289
3752-IP NOVEL FIBROUS MATERIALS FOR CIVIL ENGINEERING APPLICATIONS. Raúl Fangueiro, Sohel Rana (Invited paper).
291
2740 ANALYSIS OF ELASTIC FIELDS IN AN ISOTROPIC MEDIUM CONTAINING A PENNY-SHAPED CRACK BY THE RITZ METHOD. Abdoulnabi Tavangari, Mohammad Taher Kamali.
293
2805 EXPERIMENTAL TESTS TO STUDY THE STRUCTURAL INTEGRITY OF DOWEL TYPE JOINTS IN TIMBER STRUCTURES. Jose G. Fueyo, M. Domínguez, Jose A. Cabezas.
2883 EXPERIMENTAL STUDY OF WATER LEAK PHENOMENA OF JAPANESE TILED ROOFS UNDER VIBRATION AND SCATTERING BY WIND TUNNEL TESTING. Satoru Okamoto.
297
2972 EXPERIMENTAL STUDY OF INTERCONNECTED MARBLE EPISTYLES USING DIGITAL IMAGE CORRELATION. Stavros K. Kourkoulis, Ermioni D. Pasiou.
299
3023 EXPERIMENTAL EVALUATION OF THE SHEAR STRENGTH OF MASONRY WALLS. Jelena Milosevic, António S. Gago, Rita Bento, Mário Lopes.
301
3056 FLAT-JACK TEST ON OLD MASONRY BUILDINGS. Ana Simões, António Gago, Mário Lopes, Rita Bento.
303
3017 A MECHANICAL ANALYSIS OF THE BASE PLATE CONNECTIONS. Hamizi Mohand, Hacene Ait Aider, Hannachi N. Eddine.
305
3080 ASSESSMENT OF THE FATIGUE BEHAVIOUR OF BELLOWS EXPANSION JOINTS USED IN WATER SUPPLY SYSTEMS. Paulo A.R. Guedes, Manuel T. Neves, Catarina Tuna, Carlos Félix.
307
2982 SHORT BEAMS UNDER THREE-POINT BENDING: EXPERIMENTAL STUDY OF THE DISPLACEMENT FIELD USING 3D-DIC. Stavros K. Kourkoulis, Panagiotis E. Chatzistergos, Evangelia Ganniari-Papageorgiou.
309
3104 NUMERICAL SIMULATION OF RC SHEAR WALL STRENGTHENED BY
EXTERNAL BONDING OF A COMPOSITE MATERIAl. Ali Kezmane, Mohand Hamizi, Said Boukais, Nacer E. Hannachi.
311
TRACK_D: SENSORS AND INSTRUMENTATION 313
2928-IP LUBRICANTS AND COATINGS SELECTION TO WORK UNDER VACUUM CONDITIONS. Amaya Igartua, Edurne Berriozabal, Marcello Conte (Invited Paper).
315
2938 RESIDUAL STRAIN MONITORING DURING COMPOSITE MANUFACTURING. Nicolas Lammens, Damien Kinet, Karima Chah, Geert Luyckx, Christophe Caucheteur, Joris Degrieck.
317
2544 IDENTIFICATION OF LOCAL VISCOPLASTIC PARAMETERS IN WELDS AT ROOM TEMPERATURE AND 625°C BY INVERSE METHOD BASED ON DIGITAL IMAGE CORRELATION AND FINITE ELEMENT SIMULATION. Mathieu Touboul, Jérôme Crepin, Gilles Rousselier, Félix Latourte.
319
2807 INSTRUMENTATION OF ULTRASONIC HIGH-FREQUENCY MACHINE TO ESTIMATE APPLIED STRESS IN MIDDLE SECTION OF SPECIMEN. Yoann E. Lage, Manuel J.M. Freitas, Luís F.G. Reis, António M.R. Ribeiro, Diogo Montalvão.
321
2828 VALIDATION OF DEFORMATION AND VIBRATION MEASUREMENT
TECHNIQUES FOR NUCLEAR FUEL PINS. Ben De Pauw, Steve Vanlanduit, Francis Berghmans, Katrien VanTichelen, Thomas Geernaert.
323
3039-IP INNOVATIVE STRAIN MONITORING METHODOLOGIES OF AIRCRAFT COMPOSITES WITH EMBEDDED SENSORS. Nikolaos D. Alexopoulos, Philippe Poulin, Evangelos Karachalios, Zaira Marioli-Riga, Stavros Kourkoulis (Invited Paper).
325
3160 IMPACT TESTS OF DIFFERENT KINDS OF SPORTS MOUTHGUARDS. António Silva, Miguel Clemente, João Pinho, Mário A.P. Vaz, Joaquim Gabriel.
327
2804 INFLUENCE OF UNIFORM TRANSVERSAL LOADING ON THE SENSING CAPABILITY OF FBG SENSORS. Marco Lai, Dimitris Karalekas, John Botsis.
329
3189 REMOTE MONITORING OF SÃO PAULO METRÔ TUNNEL DEFORMATIONS USING FIBER OPTIC BASED SENSORS. Cristina Barbosa, Nuno Costa, Luís Ferreira, Francisco Araújo, Geraldo Moretti, Dennis Suzuki, Ivo Teixeira, Carlos D. Gama, Hugo C. Rocha.
331
3378 FIBRE-OPTIC SENSOR PROTOTYPE FOR HUMIDITY MEASUREMENT. Joana C. Vieira, Clara Frias, André C. Vieira, Rui Oliveira, César M.A. Vasques.
2731 ACCELERATED ISOTHERMAL AND CYCLIC AGEING OF CARBON FIBRE/EPOXY COMPOSITE PANELS WITH INTEGRATED PVDF SENSORS. Enrique Guzman, Joël Cugnoni, Thomas Gmür.
335
3762 LABORATORY TESTS OF COMPRESSIVE CREEP IN CONCRETE SAMPLES: DEVELOPMENT OF SOLUTIONS FOR PROBLEMS OF ACTUATION,
MEASUREMENT, DATA ACQUISITION AND LOAD BALANCING. João Palma, Paulo Morais, Gustavo Coelho, A. Bettencourt Ribeiro.
337
2789 POWER HARVESTING BY PIEZOELECTRIC MATERIALS AND
ELECTROMAGNETIC INDUCTION REVIEW (2006 - 2010). Carlos A. Gallo, Sergio A.A. Vieira, Marcella C.O. Chagas.
339
3068 CALIBRATION OF DYNAMIC PIEZOELECTRIC FORCE TRANSDUCERS USING THE HOPKINSON BAR TECHNIQUE. Diederik Van Nuffel, Jan Peirs, Ives De Baere, Patricia Verleysen, Joris Degrieck, Wim Van Paepegem.
341
2663 ULTRASONIC PROCESSING AND MECHANICAL TESTING IN FOOD
TECHNOLOGY AND BIOTECHNOLOGY. Damir Semenski, Mladen Brnčić, Tomislav Bosiljkov, Sven Karlović, Damir Ježek, Branko Tripalo.
343
3760 MATHEMATICAL MODEL FOR A 400 mm EXTENSOMETER: CONSTRUCTION, VALIDATION AND PARAMETERIZATION. Alexandre Freitas, Fernando Oliveira, Paulo Morais, Álvaro Ribeiro.
345
2862 NEW METHODOLOGIES TO MEASURE IN REAL TIME FUEL CONSUMPTION OF INTERNAL COMBUSTION ENGINES. Henrique Fonseca, Carlos Ferreira, Telmo Fernandes.
347
3102 VORTEX SHEDDING FLOWMETER. A STRAIN GAUGE SENSOR AND QUADRANGULAR SECTION. A. Zaaraoui, F. Margnat, S. Khelladi, F. Ravelet.
349
TRACK_E: TEACHING EXPERIMENTAL MECHANICS 351
2750 DEVELOPMENT AND EVALUATION OF EQUIPMENT FOR WIRELESS STRAIN MEASUREMENT SUITABLE FOR DIDACTIC APPLICATIONS. Nuno Peixinho, Nuno Gonçalves.
353
2832 PROFILES OF COMPOSITES IN POOL COVERS AS AN ALTERNATIVE FOR SPECIAL APPLICATIONS. R.J. García, J.G. Fueyo, G. Pérez, R. Allende.
355
2962 EXPERIMENTAL AND NUMERICAL SIMULATION OF THE BACKWARD
EXTRUSION PROCESS FOR ANNEALED STEEL AISI 1010. Gilmar C. Silva, José R.G. Carneiro, André B.C. França, Sara A.R. Polecio.
357
3168 THE MEASUREMENT OF THE BEAM CURVATURE FIELD USING SPECKLE INTERFEROMETRY TECHNIQUES. Hernani Lopes, Daniel J.S. Gonçalves, Jaime Monteiro, J.F. Silva Gomes.
359
3805 A DIDACTIC FORCE PLATE FOR ANIMAL GAIT PERFORMANCE ASSESSMENT. L. Mourão, João P. Vilas Boas, Nuno Viriato, Jaime Monteiro, Mário A.P. Vaz.
361
TRACK_F: MODES OF FAILURE 363
3001-IP RETROFITTING OF OLD RIVETED PORTUGUESE BRIDGES. PAST AND CURRENT REMNANT LIFE ASSESSMENT RESEARCH. António A. Fernandes, Abílio M.P. Jesus, António L.L. Silva, José F.O. Correia (Invited Paper).
365
2664 EXPERIMENTAL STUDY OF PLASTIC DEFORMATION AND FAILURE OF 2024 ALUMINUM PLATE. Amos Gilat, Jeremy D. Seidt, Paul A. DuBois, Cing-Dao (Steve) Kan.
367
2685 PREDICTION OF FATIGUE KINKED CRACK ANGLES IN RESISTANCE SPOT WELDED JOINTS. Soran Hassanifard.
2692 ANALYSIS OF STABILITY OF STRAIGHT SIDE BUCKLES ON ELASTIC SUBSTRATES. H.K. Jia, S.B. Wang, P. Goudeau, L.A. Li, Z.M. Guo.
371
2925 ON THE FATIGUE CHARACTERISTICS OF ADVANCED AIRCRAFT WROUGHT 2198 AND 6156 ALUMINIUM ALLOYS. Nikolaos D. Alexopoulos, Evangelos Miglis, Antonis Stylianos.
373
3809 TELEPHONE CORD PROPAGATION INDUCED BY ADHESION: EXPERIMENT VS. SIMULATIONS. Jean-Yvon Faou, Guillaume Parry, Sergey Grachev, Etienne Barthel.
375
3044 AN EFFECT OF HEAT TREATMENT ON SENSITIVITY OF 42SiCr STEEL TO INCLUSIONS UNDER FATIGUE LOADING. Jiří Sís, Ivo Černý, Dagmar Mikulová.
377
3072 FRETTING FATIGUE LIFE ESTIMATIONS BASED on CRITICAL DISTANCE THEORY. Toshioo Hattori, Minoru Yamashita.
379
3232 PROGRAM FOR ASSESSMENT OF FATIGUE RESULTS. Constanze Przybilla, Sergio G. Collado, Enrique Castillo, Manuel López-Aenlle, Alfonzo Fernández-Canteli.
381
2635 OBSERVATION OF CRACKS IN CARBON STEEL UNDER CONTACT ROLLING FATIGUE BY MICRO CT IMAGING USING ULTRA-BRIGHT SYNCHROTRON RADIATION. Yoshikazu Nakai, Daiki Shiozawa, Yoshiyuki Fukuda, Yutaka Neishi, Taizo Makino.
383
2753 STATIC AND FATIGUE DAMAGE EVOLUTION IN SINTER-HARDENED POROUS STEELS. Matteo Benedetti, Vigilio Fontanari, Giovanni Straffelini.
385
2638 PRECRACK INTRODUCING METHOD IN CT-SPECIMEN FOR MEASURING K1C VALUES OF BRITTLE MATERIALS. Kenichi Tamura, Shintaro Tamura, Atsushi Hashimoto.
387
2683 NUMERICAL AND EXPERIMENTAL INVESTIGATION OF FATIGUE CRACK GROWTH IN FSW OF DISSIMILAR METAL JOINTS. Soran Hassanifard, Amir Parghazeh, Mohammad Zehsaz.
389
2706 FATIGUE PROPERTIES OF MACHINED SPECIMENS FROM CAST AND FORGED RAILROAD WHEELS. Syme Queiroz, D. Minicucci, R.V. Boas, V. Guimarães, I. Ferreira.
391
2602 AGEING CHARACERIZATION OF EXHAUST FLEXIBLE COUPLINGS. Francesca Curà, Andrea Mura, Raffaella Sesana.
393
2699 THE SUPPORT EFFECT APPROACH FOR FATIGUE RESISTANCE PREVISION OF TI-6AL-4V ALLOY, WITH AND WITHOUT SURFACE TREATMENT. Giorgio Olmi, Alessandro Freddi.
395
2775 EFFECT OF THE SURFACE FINISH ON HCF IN STEELS: A THERMOGRAPHIC APPROACH. Francesca Curà, Raffaella Sesana.
397
2783 MODELLING MONOTONIC BEHAVIOUR IN STEEL COMPONENTS SUPPORTED BY IMAGE-BASED METHODS. João Pereira, Abílio Jesus, José Xavier.
399
2565 BUCKLING ANALYSIS OF WOVEN GLASS EPOXY LAMINATED COMPOSITE PLATE. M. Mohan Kumar, V. Jacob Colins, N. Lakshminarayana, B.M. Puneeth, M. Nagabhushana.
401
3069 A COMPARATIVE MECHANICAL ANALYSIS OF THE EFFECT CAUSED BY ARTIFICIAL AND REAL INDUCED INTERLAMINAR DAMAGE IN COMPOSITE LAMINATES. Marco A. Pérez, Lluis Gil, Sergio Oller.
403
TRACK_G: NANOTECHNOLOGIES AND NANOMATERIALS 405
2688 EFFECTS OF SIO2 NANOPARTICLE DISTRIBUTION QUALITY ON INLINE
MEASURED MELT VISCOSITIES IN TWIN SCREW EXTRUDER PROCESSING. Rolf Walter, Thomas Burkhart.
407
2726 BUCKLING AND POST-BUCKLING OF THIN FILM UNDER THERMAL-MECHANICAL COUPLED LOAD. Xiuli Xue, Shibin Wang, Haikun Jia, Linan Li, Zongzheng Wang.
2979 NOVEL ALLOYS FOR SOLDERING CARBON NANOTUBES FIBERS AND OTHER CARBON BASED STRUCTURES. Marek Burda, Andrzej Gruszczyk, Tomasz Kik, Krzysztof Kozioł, Agnieszka Łękawa-Raus.
411
3119 FULL-FIELD STRESS AND STRAIN MEASUREMENT IN (STRUCTURED) MEMBRANES. Johan Hoefnagels, Jan Neggers, François Hild, Stéphane Roux, Marc Geers.
413
3031 THICKNESS DEPENDENCE OF THE INTERNAL FRICTIONS IN COPPER THIN FILM. Yu-Ting Wang, Chi-Jia Tong, Ya-Chi Cheng, Ming-Tzer Lin.
415
2542 PROPERTIES OF POLYMER COMPOSITES FILLED WITH SIO2, ZNO AND MG(OH)2 NANO POWDER. Munir Tasdemir, Sezgin Ersoy.
417
3054 THE RESIDUAL STRESSES ON MECHANICAL PROPERTIES OF COPPER THIN FILMS. C.M. Fernandes, M.F. Vieira, M.T. Vieira.
419
TRACK_H: BIOMECHANICAL APPLICATIONS 421
2796 EXPERIMENTAL AND NUMERICAL VALIDATION OF A COMMERCIAL PRESS-FIT FEMORAL PROSTHESIS. Ricardo J.J. Duarte, António Ramos, Carlos Relvas, António Completo, José A. Simões.
423
2643 ASSESSMENT OF EFFICIENCY AND VIBRO-ACOUSTIC BEHAVIOUR OF
PROSTHESIS PROTOTYPES. Marco Troncossi, Emanuele Gruppioni, Alessandro Rivola.
425
2825 COMPARATIVE ANALYSIS OF MATERIALS OF PROSTHETIC LINERS FOR LOWER LIMB AMPUTEES. Elisa G. Marchesin, Chiara Colombo, Laura Vergani.
427
2873 THE EFFECT OF REPEATED IMPACTS ON LUMBAR INTERVERTEBRAL DISC MECHANICS DURING A DIURNAL CYCLE. David Jamison, Christopher J. Massey, Eric C. Pierce, Michele A. Marcolongo.
429
2620 MODAL TESTING IS A VALID METHOD FOR MEASURING THE MECHANICAL PROPERTIES OF HUMAN LUMBAR MOTION SEGMENTS. S.J.P.M. VanEngelen, M.H.M. Ellenbroek, B.J. VanRoyen, A. DeBoer, J.H. VanDieen.
431
2547 A COMPARATIVE STRAIN ANALYSIS OF BONE DEFECT REPAIR TECHNIQUES IN PROXIMAL TIBIA. Antonio Completo, Ricardo Duarte, Antonio Ramos, Carlos Relvas, Joana Pereira, Susana Meireles, José A. Simões.
433
2566 BONE STRAIN ASSESSMENT IN A SECTION OF A CEMENTED HIP
REPLACEMENT: NUMERICAL AND EXPERIMENTAL VALIDATION. A. Ramos, C. Relvas, A. Completo, J. A. Simões.
435
2559 AN INITIAL APPROACH ON ARTHRITICS HIP JOINT USING FINITE ELEMENT METHOD. Wei Li, Damian Griffin, Ken Mao, Derek Chetwynd.
437
2624 STUDY OF MECHANICAL BEHAVIOUR OF BLOOD BY RHEOMETRY. M.M. Alves, C. Rocha, M.P. Gonçalves.
439
2757 PSEUDO-DYNAMIC ANALYSIS OF THE BIOMECHANICS OF THE HIP REPLACEMENT USING A FORCE METHOD BASED ON THE NEWMARK ALGORITHM. Pedro Talaia, António Ramos, Francisco J. Queirós de Melo, José A. Simões.
441
2681 IDENTIFICATION OF LUMBAR DISC DEGENERATION FROM DIVERGENT VALUES IN THE STIFFNESS MATRIX: WORK IN PROGRESS. S.J.P.M. VanEngelen, M.H.M. Ellenbroek, A. DeBoer, J.H. Van Dieen.
443
2956 DEVELOPMENT OF A BIOMECHANICAL EXPERIMENTAL METHOD TO PRODUCE AND TO ANALYSE THORACOLUMBAR BURST FRACTURES. S. D’Houtaud, M. Saget, F. Hesser, P. Doumalin, J.C. Dupré, F. Brémand, P. Maxy, P. Rigoard, A. Germaneau.
445
2754 MANUFACTURING OF LOWER-LIMB CUSTOM FIT PROSTETHICS SOCKET USING REVERSE ENGINEERING. Ana Curralo, Luís Queijo, João Rocha.
2822 THE INFLUENCE OF BONE MECHANICAL PROPERTIES ON THE BEHAVIOR OF THE CADAVERIC MANDIBLE - EXPERIMENTAL AND NUMERIC CORRELATION. Hugo R. Marques, António Ramos, Carlos Relvas, António Completo, José A. Simões.
449
2842 DEVELOPMENT OF AN IMPLANTALBE TENSOMETER FOR IN VIVO STRAIN MEASURMENT OF BIOLOGICAL MATERIALS. Riley Meehan, Anil Saigal, Thomas P. James.
451
3101 BIO-CAD MODELING OF HUMAN KNEE. Hacene Ameddah, Mekki Assas. 453 2771 ANALYSIS OF THE KINEMATICS OF GAIT OF YOUNG ADULT FEMALE
CARRYING A COMPUTER BAG WITH SINGLE HANDLE. João Rocha, Luis Queijo.
455
2854 OTOSCLEROSIS AND ITS CORRECTION. Fernanda Gentil, Carolina Garbe, Marco Parente, Pedro Martins, Renato N. Jorge.
457
2870 STUDY OF THE EFFECT OF DIFFERENT EARDRUM THROUGH THE ANALYSIS OF STAPEDIUS MUSCLE STRAIN. Carolina Garbe, Fernanda Gentil, Marco Parente, Pedro Martins, Renato N. Jorge.
459
2878 COMPARISON BETWEEN MECHANICAL PROPERTIES AND MICROSTRUCTURE OF ALLOY TI-6AL4V, COLD WORK VERSUS PROTOTIPES BY DIRECT METAL LASER SINTERING. Rafael F. Gregolin, Thais M. Lenquist, Marcelo C. Anibal, Davi S. Borghi, Ruis C. Tokimatsu.
461
2917 ANGULAR ANALYSIS OF THE SHOT IN SUSPENSION IN VOLLEYBALL: A CASE STUDY IN VOLLEYBALL PLAYERS OF BOTH SEXES OF SCHOOLS OF THE CITY OF MAPUTO AGED 14-16 YEARS. G. Macha, A. Graziano.
463
3024 EXPERIMENTAL STUDY ABOUT CHECK VALVE IN NEUROLOGICAL
APPLICATION. Camila Bim, Edson Vieira, Sérgio S. Mansur, Marcos P. Barbosa, José R.C. Pinto, Angelo L. Maset.
465
3020 EXPERIMENTAL BIOMECHANICAL CHARACTERIZATION AND NUMERICAL ANALYSIS OF THE TEMPOROMANDIBULAR JOINT. María-Jesús Lamela, Pelayo Fernández, David Dorantes, Alberto Ramos, Eiji Tanaka, Antonio Argüelles, Alfonso Fernández-Canteli.
467
2629 DYNAMICS IN MOTION OF DANDELION FLOWER HEAD. Seiichi Sudo, Masahiro Shiono, Atsushi Shirai, Toshiyuki Hayase.
469
2758 EXPERIMENTAL STUDY OF ACOUSTIC STREAMING PHENOMENON
GENERATED BY PIEZOELECTRIC TRANSDUCERS. S.O. Catarino, J.M. Miranda, S. Lanceros-Mendez, G. Minas.
471
2787 EVALUATION OF MAINTAINABILITY IN ANESTHESIA CARTS. Paulo Francisco Carmo, Rogerio Amaral, Gustavo Tomazi Ludwig.
473
2647 THE ACOUSTIC POLYACTIVE MATRIX FOR FORMATION OF A WIDE
SPECTRUM OF SPATIO-TEMPORAL ACOUSTIC INFLUENCES. Altksey A. Novikov, Jacob B. Shuster, Maxim A. Khazanov, Sergey V. Barinov, Tatyana K. Denisov.
475
2679 BIOMECHANICAL BEHAVIOR OF THE SYSTEM PROSTHESIS/ DENTAL IMPLANT: ANALYSIS BY THE PHOTOELASTICITY METHOD. Sarah B. Lopes, Cássia B. Corrêa, Cleudmar A. Araújo, Luis G. Vaz.
477
2929 MACRO MODEL OF A BRACKET FOR THE MEASUREMENT OF FORCES INVOLVED IN ORTHODONTIC DEVICES, NUMERICAL AND EXPERIMENTAL VALIDATION. Margarida Bola, António Ramos, Carlos Relvas, António Completo, José A. Simões.
479
2887 HYPERELASTICITY OF RUBBER-LIKE MATERIALS USING EVOLUTIONARY OPTIMIZATION TECHNIQUES. Pedro Martins, Renato N. Jorge, Pedro Talaia, Luana Souto.
481
2964 MEASURING THE OPTICAL ROTATION ANGLE AND CIRCULAR DICHROISM OF ANISOTROPIC OPTICAL MEDIA USING OPTICAL HETERODYNE
INTERFEROMETER. Yu-Lung Lo, Chang-Ye Li.
2985 DEVICE FOR MEASURING SKINFOLD THICKNESS WITH CONSTANT FORCE ACTUATOR MECHANISM. Manuel R. Quintas, Carlos M. Silva, Tiago Andrade, M. Teresa Restivo, M. Fátima Chouzal, Teresa F. Amaral.
485
2992 VISCOELASTIC MODELS FOR NATURAL LIGAMENTS: PREDICTION STRESS RELAXATION FROM CREEP. Viviana Pinto, Rui M. Guedes.
487
TRACK_I: THERMO-FLUID SYSTEMS 489
3128-IP EXPERIMENTAL FOREST FIRE RESEARCH. Domingos X. Viegas, Miguel Almeida, Jorge Raposo, David Davim (Invited paper).
491
2709 NUMERICAL STUDY OF NATURAL CONVECTION IN VENTILATED ENVIRONMENTS. Luiz J.C. Rocha, Henor A. Souza.
493
2717 VISUALIZATION OF NUCLEATE BOILING OF REFRIGERANT HCFC123 IN A MINI-TUBE. Keiji Murata, Koichi Araga, Takeharu Etoh, Kohsei Takehara.
495
2844 ANALYSIS OF THE PERFORMANCE OF A COOLING SYSTEM VAPOR
COMPRESSION WITH VARIABLE SPEED. Luiz J.C. Rocha, Karla B.P. Palmieri, Diogo R. Prado, Vinícius T. Oliveira, Rovadávia A.J. Ribas.
497
3032 IMPACT OF DIFFERENT IN-CYLINDER PRESSURES ON HYDRAULICAL PERFORMANCES OF THE DIESEL FUEL INJECTION SYSTEMS. Alexandru B. Muntean, Cristian Soimaru, Sorin Sacareano, Ruxandra C. Stanescu.
499
2863 THERMAL PERFORMANCE OF METAL ROOFS WITH DIFFERENT SHAPES IN CAMPO GRANDE - BRAZIL. Alexandra S. Dias, Henor A. Souza, Marcelo C. Amorim.
501
2997 STUDY ON BIO-DIESEL FUEL PRODUCTION FROM COFFEE GROUNDS BY SOLID CATALYST METHOD. Koji Mori, Hiroki Matsubara, Kosuke Kitagawa, Yuma Kubota, Ryosuke Takahashi.
503
2548 IMAGE PROCESSING FOR THE INVESTIGATION OF COMPLEX FLOWS. PART I: USE OF STD TO CHARACTERIZE A SILO DISCHARGE PROCESS. Nsom Blaise, Latrache Noureddine.
505
2549 IMAGE PROCESSING FOR THE INVESTIGATION OF COMPLEX FLOWS. PART II: PROPAGATION OF POLLUTANT OVER THE FREE SURFACE OF A BASIN OF SALTY WATER AT REST. Latrache Noureddine, Nsom Blaise.
507
2561 OPTIMAL DESIGN AND OPERATION OF GAS TRANSMISSION PIPELINES. T.M. Elshiekh, S.A. Khalil, H.A. El Mawgoud.
509
2848 CORRELATION BETWEEN PULSE LEVEL AND TEMPERATURE IN A GAS FLOW METER. Vlad Jinga, Cornel Samoila, Doru Ursutiu, Petru A. Cotfas.
511
3022 STEADY AND UNSTEADY FLOW VISUALIZATION INSIDE A CHANNEL WITH WALL SQUARE PROTUBERANCES IN MODERATE REYNOLDS NUMBERS. Rodrigo A. Bassan, Odenir Almeida, Sérgio S. Mansur, Edson Vieira.
513
2931 EXPERIMENTAL STUDY ON THE VORTEX TUBE POTENTIAL TO INCREASE AIR MOISTURE REMOVAL AND CARRYING CAPABILITY. George Stanescu, Carlos A.O. Cabral, Marcelo C. Santos.
515
3064 EXPERIMENTAL STUDY OF AERODYNAMIC DAMPING OF A PIEZOELECTRIC FAN. R. Shirzadeh, P. Guillaume, M.A. Bidakhvidi.
517
2599 MIXED CONVECTION IN TWO SIDED LID-DRIVEN CAVITY FOR
NON-NEWTONIAN FLUID OF BINGHAM MODEL. Toufik Benmalek, Nabil Benyahia, Ferhet Souidi.
519
2675 COLLISION OF SMALL MAGNET COATED WITH MAGNETIC FLUID ON A
WATER SURFACE. Seiichi Sudo, Hirayoshi Takayanagi, Tetsuya Yano, Muneo Futamura, Hideya Nishiyama.
521
3036 FLOW AROUND A SQUARE CYLINDER POSITIONED NEAR A SMOOTH FLAT PLATE. Edson R. Vieira, Sérgio S. Mansur, Edson Vieira.
TRACK_J: CASE STUDIES 525
2808 AERONAUTICAL LIGHT WEIGHT ALUMINIUM STRUCTURES DESIGN
OPTIMIZATION AND TESTING. Esteban Cañibano, Omar delAmo, Blanca Araujo, César Maestro, Angel Luis Caminero.
527
3837 YOUNG’S MODULUS DETERMINATION: DIFFERENT METHODS AND ASSOCIATED UNCERTAINTIES. Daniel Peixoto, Carlos Sousa, M. Teresa Restivo, Álvaro Ribeiro, José Rodrigues.
529
3035 RESPONSE OF SPACECRAFT STRUCTURAL ELEMENTS AT MEDIUM FREQUENCY VIBROACOUSTIC LOADS. Omar A.S. Duque, Jesús L. Díez.
531
3089 HIGH PRECISION POSITIONING SYSTEM FOR AIRCRACT STRUCTURAL ASSEMBLY. Gerhard Meffert, Taoufik Mbarek, Nihat Biyiklioglu.
533
2944 FUEL AIRCRAFT VALVES TEST BENCH. Luis Silva, José Marques, Teresa Morgado. 535 3112 THE USE OF STATISTICAL PROCESS CONTROL (SPC) WEIGHING IN THE
CONTROL SCALES RAILWAY DYNAMICS IN A MINING COMPANY. Claudinei J. Oliveira, Éder A. Figueiredo.
537
3753 STUDY OF A METAL AUTOMOTIVE COMPONENT: NUMERICAL AND
EXPERIMENTAL RESULTS. Luís Sousa, Luís Reis, Mihail Fontul, Antório R. Ribeiro.
539
2941 INFLUENCE OF COOLING RATE ON THE AUSTENITE DECOMPOSITION IN HOT STAMPING THE DIN 27MNCRB5 STEEL. Bruno F. Henriques, Sergio T. Button.
541
2786 DETERMINATION OF LINEARIZED CONTROL (QVC) FLOW RATE FOR
PROPORTIONAL DIRECTIONAL VALVES PRESENTING LEAKAGE. Paulo Francisco Carmo, Adonis Menezes.
543
2557-IP COMPACT VIBRATION ISOLATOR FOR PROTECTING MEMS OSCILLATOR AND SENSITIVE ELECTRONIC DEVICES. Yan Liu, Hejun Du, Li King Ho Holden, Neo Mingfeng (Invited Paper).
545
3166 DEEP MILLING OF METALS WITH NS PULSED FIBER LASER: CONSIDERATIONS FOR FABRICATION OF MICROCAVITIES. Marta Oliveira, Susana Olhero.
547
2836 STUDY OF THE CONNECTIONS BEHAVIOUR IN ROAD SAFETY BARRIERS. Bruno A. Silva, José F. Meireles.
549
2714 STRAIN ANALYSIS OF THIN PIPE PRESSURE VESSELS USING DIGITAL IMAGE CORRELATION. L.D. Rodrigues, J.L.F. Freire, R.D. Vieira, J.T.P. Castro.
551
2849 A FAILURE STUDY OF LOAD CELLS USED ON CYLINDRICAL VESSELS OF RAW MATERIAL. Carlos Rodrigues, Teresa Morgado.
553
3174 ESTIMATION OF ACOUSTIC ENERGY HARVESTED FROM SOUND USING ELECTROMAGNETIC TRANSDUCER. Nicolae Filip, Gabriel Fodor, Liucian Candale.
555
2628 EXPERIMENTAL AND NUMERICAL ANALYSIS OF SQUARE IMPACT ROLLER ON CHANNEL BANK. Bijan Bastaee, Mansour Parvizi.
557
2845 A COMPARISON OF GFRP AND HYBRID BEAMS UNDER CYCLIC LOADING APPLICATIONS. Roselita Fragoudakis, Anil Saigal.
559
2653 EXPERIMENTAL VERIFICATION OF THE TRIPLE HYBRID HYDROGEN FUEL CELL BUS MBS MODEL. Jaroslav Václavík, Pavel Polach, Jan Chvojan.
561
2567 STEEL USED AS A SOLUTION FOR STRUCTURAL AND ARCHITECTONIC RESTORATION OF HISTORICAL BUILDINGS - THE CASE OF THE MUSEUM OF THE MINES AND THE METAL OF BELO HORIZONTE, BRAZIL. Franciele M.C. Ferreira, Henor A. Souza.
563
2820 ARCHITECTURAL AND STRUCTURAL ANALYSIS FOR INTERVENTION IN HISTORIC BUILDINGS. Luciana B.C. Veloso, Ernani C. Araújo.
TRACK_K: OPTICAL TECHNIQUES 567
2795 A NEW PROJECTING MOIRE TECHENIQUE OF USING COLOR-ENCODED
FRINGES FOR SURFACE SHAPE AND DEFORMATION MEASUREMENT. Jing Fang, Jue Zhang, Hui Jun Chen, Lv Xing.
569
2847 SHORT REMARKS ABOUT SYNTHETIC IMAGE GENERATION IN THE CONTEXT OF THE ASSESSMENT OF SUB-PIXEL ACCURACY OF DIGITAL IMAGE
CORRELATION. Michel Bornert, Pascal Doumalin, J.C. Dupré, Christophe Poilane, Laurent Robert, E. Toussaint, Bertrand Wattrisse.
571
3187 DETERMINATION OF ALL STRESS COMPONENTS OF AXISYMMETRIC STRESS STATE IN PHOTOELASTIC TOMOGRAPHY. Andrei Errapart, Hillar Aben.
573
3005 RANGE EXTENTION ALGORITHM FOR TEMPORAL PHASE UNWRAPPING OF PHOTOELASTIC PHASE MAP. Min-Jui Huang, Fu-You Lao, Shuo-Chieh Liu.
575
2667 IS IT POSSIBLE TO OBTAIN QUANTITATIVE RESIDUAL STRESS VALUES FROM TSA?. A. Robinson, J.M. Dulieu-Barton, S. Quinn, R.L. Burguete.
577
2763 SUPPRESSION OF ELONGATION OF RECONSTRUCTED TRACER PARTICLES DISPERSED IN RAPID PROTOTYPE MODEL BY MEANS OF DIGITAL IN-LINE HOLOGRAPHY USING TWO-WAVELENGTH RECONSTRUCTION. Tanaka Yohsuke, Murata Shigeru.
579
3073 DISPLACEMENT AND STRESS MEASUREMENT UNDER BIAXIAL LOADING USING ELECTRONIC SPECKLE INTERFEROMETRY (ESPI) COMBINING HOLE-DRILLING TECHNIQUE. Jong-Ning Aoh, Bing-Lun Lyu, Pai-Chen Lin, Tai-Hsin Liou.
581
3096 EXPERIMENTAL ANALYSIS OF PULSED HIGH-POWER ELECTRONIC
COMPONENTS BY HIGH SPEED SPECKLE INTERFEROMETRY. Ioana Nistea, Dan Borza.
583
3818 MEASUREMENT OF THE FULL-FIELD MODAL ROTATION FIELD OF A
LAMINATED PLATE. Hernani Lopes, J.V. Araújo Santos, F. Ferreira, J.F. Silva Gomes.
585
2644 PHASE ALGORITHM INTEGRATING DIRECT-CORRELATION AND FOUR-STEP PHASE-SHIFTING FOR ELECTRONIC SPECKLE PATTERN INTERFEROMETRY. Changqing Cai, Lingfeng He.
587
2729 ANGULAR SCANNING WHITE LIGHT SHEARING INTERFEROMETER. Shyh-Tsong Lin, Ming-Han Xie.
589
2827 CAD-BASED CALIBRATION OF A 3D DIC SYSTEM APPLIED TO THE WELDING BRAZING PROCESS OF AUTOMOTIVE THIN STEEL SHEETS. Benoît Beaubier, Karine Lavernhe-Taillard, Gilles Besnard, Stéphane Roux, René Billardon, François Hild, Patrice Auger.
591
2859 DEFORMATION MONITORING OF FIVE STORIED WOODEN PAGODA BY USING IMAGE PROCESSING. Yasushi Niitsu, Takaaki Iizuka, Chikahiro Minowa, Toshikazu Hamazato.
593
3019 NON-CONTACT STAND-OFF OPTICAL SENSING OF CABLE VIBRATIONS FOR MONITORING STRUCTURAL HEALTH OF THE WILLIAM H. HARSHA BRIDGE. Jeffrey R. Hay, John F. Kielkopf, Frank O. Clark.
595
3088 MICROMOVEMENT MEASUREMENTS OF ENDOSSEOUS DENTAL IMPLANTS WITH 3D DIGITAL IMAGE CORRELATION METHOD. Tânia Rodrigues, Augusta Neto, Pedro Nicolau.
597
2741 MEASUREMENT OF CRACK TIP DEFORMATIONS USING A GRID OF CIRCULAR DOTS. Perng-Fei Luo, Yung I. Tsai.
599
2784 CHARACTERISATION OF S185 STEEL UNDER MONOTONIC LOADING BY A FEATURE TRACKING METHOD. João Pereira, Abílio Jesus, José Xavier, João Tavares.
TRACK_L: IMPACT AND CRASHWORTHINESS 603
2730 EXPERIMENTAL RESEARCH OF ULTRASONIC PEENING BY IMPACTING TOOL WITH AN INTERMEDIATE STRIKER. Makhmut M. Ganiev, Ildar K. Vagapov, Ildar M. Ganiev, Artem S. Shinkarev.
605
2734 AN EXPERIMENTAL COMPARISON OF VERTICAL WATER ENTRY BETWEEN A RIGID CYLINDRICAL BODY AND A DEFORMABLE CYLINDRICAL COMPOSITE SHELL. Diederik Van Nuffel, Ives De Baere, Julien De Rouck, Joris Degrieck, Wim Van Paepegem.
607
2746 FATIGUE SPECTRUM TESTS ON SHAFTS SUBJECTED TO BALLISTIC PERFORATION. Andrea Manes, Lorenzo Giudici, Marco Giglio.
609
2756 THERMOGRAPHIC EVALUATION OF IMPACT DAMAGE. Laura Vergani, Chiara Colombo.
611
2839 IMPACT RESISTANCE OF VP159 HIGH NITROGEN STEEL. Wojciech Moćko, Zbigniew L. Kowalewski.
613
2855 INFLUENCE OF HEAT TREATMENTS ON THE TOUGHNESS OF A NEW
SUPERMARTENSITIC STAINLESS STEEL. Sérgio S.M. Tavares, Bruno A.R.S. Barbosa, Juan M. Pardal, Guttemberg C. Souza, Verónica Anchieta.
615
2886-IP HIGH STRAIN RATE TENSILE TESTING OF COMPOSITES USING ULTRA HIGH SPEED IMAGING. Fabrice Pierron, Clive Siviour (Invited Paper).
617
2937 FINITE ELEMENT EVALUATION OF PROJECTILE NOSE CURVATURE RADIUS EFFECT IN BALLISTIC PERFORATION OF COMPOSITE MATERIALS. M.J. Khoshgoftar, C.H. Liaghat.
619
3071 INDENTIFICATION OF JOHNSON-COOK CONSTITUTIVE MODEL PARAMETERS FOR HIGHT STRAIN RATE DEFORMATION. Xicheng Huang, Jianshi Zhu, Wenjun Hu.
621
2690 CRASH WORTHINESS OF HYBRID PILLAR STRUCTURES CONSISTING OF SHEET METAL AND LOCAL CFRP REINFORCEMENTS. Christian Lauter, Jörg Niewel, Bernd Siewers, Björn Zanft, Thomas Tröster.
623
2926 INSTRUMENTED CHARPY IMPACT BEHAVIOUR OF DIFFERENT ARTIFICIALLY AGED A357 ALUMINUM ALLOYS. Nikolaos D. Alexopoulos, Antonis Stylianos.
625
2973 EXPERIMENTAL STUDY ON DYNAMIC COMPRESSIVE MECHANICAL
PROPERTIES OF V-5Cr-5Ti AT HIGH TEMPERATURE. Ruoze Xie, Wenjun Hu, Peng He, Xiaoxia Pan, Fangju Zhang, Xicheng Huang.
627
C. SPECIAL SYMPOSIA 629
SYMP_02: EXP. TECHNIQUES IN BIOMECHANICS AND SPORTS ENGINEERING 631
3051 EXPERIMENTAL AND NUMERICAL ANALYSIS OF CONTACT PRESSURE OF HOUSE MECHANICAL VENTILATION SYSTEMS. Pedro Talaia, Luana Souto, Nuno Silva, Marta Drummond, Renato N. Jorge.
633
2898 EXPERIMENTAL ANALYSIS OF SKIN SLIDING ON THE KNEE JOINT USING ORTHOSIS DEVICE. Baptiste Pierrat, Jérôme Molimard, Paul Calmels, Laurent Navarro, Stéphane Avril.
635
2760 INSTRUMENTATION OF A RACING BICYCLE FOR OUTDOOR FIELD TESTING AND EVALUATION OF THE CYCLIST'S COMFORT PERCEPTION. Joachim Vanwalleghem, Frederik Mortier, Ives De Baere, Mia Loccufier, Wim Van Paepegem.
637
2939 PERFORMANCE EVALUATION OF A TENNIS RACKET. Nuno V. Ramos, Hernâni Lopes, Filipe Conceição, Mário A.P. Vaz.
639
2950 INFLUENCE OF THE STICK PROPERTIES IN THE STROKE PERFORMANCE OF ROLLER HOCKEY. Mário A.P. Vaz, Nuno V. Ramos, Filipe Conceição, F.Q. Melo, José Ferreira.
3816 FIELD ASSESSMENT OF THE KAYAKS' TOTAL DRAG FORCE. Beatriz Gomes, Nuno V. Ramos, Filipe Conceição, João P. Vilas Boas, Mário A.P. Vaz.
643
2884 EVALUATION OF SKILLS IN BATTING TECHNIQUE IN BASEBALL USING ACCELERATION SENSORS. Satoru Okamoto.
645
2745 AN EXPERIMENTAL METHODOLOGY FOR THE ASSESSMENT OF CLIMBING DEVICES ACTUAL STRENGTH. Andrea Manes, Vittorio Bedogni, Davide Rogora.
647
SYMP_03: EXP. AND COMP. BIO-IMAGING AND VISUALIZATION 649
2669 ASSESSMENT OF THE ABSORBED DOSE IN THE THYROID, AS A CRITICAL ORGAN IN SCINTIGRAPHIES WITH 123I AND Na99mTcO4-, USING MONTE CARLO METHODS AND BIOKINETIC MODELS. Bruno Martins, Joana Bento, Francisco Alves, Paula Colarinha, Nuno Teixeira, Pedro Teles, Pedro Vaz.
651
2686 EXTRACTION AND VISUALIZATION OF FUNCTIONAL BRAIN CONNECTIVITY NETWORKS FROM EEG AND FMRI DATA. Jos B.T.M. Roerdink.
653
2895 THE ROLE OF MEDICAL IMAGING RESOLUTION ON THE 3D FE MESH
GENERATION OF ANATOMICAL STRUCTURES. S. Cortez, M. Pinheiro, J.C. Pimenta Claro, J.L. Alves.
655
3828 AUTOMATIC SEGMENTATION ALGORITHM FOR THE LUMEN OF THE CAROTID ARTERY IN ULTRASOUND B-MODE IMAGES. André M.F. Santos, João M.R.S. Tavares, Luísa Sousa, Rosa Santos, Pedro A. Castro, Elsa Azevedo.
657
3830 AN ARTIFICIAL LIFE MODEL FOR IMAGE ENHANCEMENT . Alex F, Araujo, João M.R.S. Tavares.
659
2986 INFLUENCE OF THE INCLINATION OF THE ULTRASOUND TRANSDUCERS ON THE EFFICIENCY OF AXIAL ULTRASONOMETRY. Giuliano Barbieri, Cláudio H. Barbieri.
661
2987 IN VIVO DIAGNOSIS OF THE BONE HEALING STATUS BY ULTRASONOMETRIC USING THE CONTRALATERAL LIMB FOR COMPARISON. Giuliano Barbieri, Nilton Mazzer, Cláudio H. Barbieri.
663
SYMP_05: MECHANICAL DESIGN AND PRODUCT DEVELOPMENT 665
2660 CHALLENGES IN THE RELATIONSHIP BETWEEN DESIGNERS AND ENGINEERS IN PRODUCT DEVELOPMENT TEAMS. Joana Vale, Marta Oliveira, F. Jorge Lino.
667
2817 INDUSTRIAL DESIGN WORKSHOP: AUTO-SUSTAINABLE GUEST-HOUSE FOR VIAUC STUDENTS. Pedro Joel Costa, Mariana Rodrigues, Nina Costa, Pedro Menéres, Rita Rodrigues, Teresa Alaniz.
669
2814 INDUSTRIAL DESIGN OF SPACE. LIGHT AND SUSTAINABLE PREFABRICATED MODULAR HOUSING STRUCTURES. Pedro Joel Costa, Gonçalo M. Furtado, José Amorim Faria.
671
2864 PP Nº97: ARCHITECTURAL MODELLING OF COMPONENTS IN COMPOSITE MATERIALS FOR TEMPORARY SHELTER FACILITIES. André Chaves, Gonçalo Furtado, F. Jorge Lino.
673
2857 MODELLING CREATIVITY IN PRODUCT DEVELOPMENT: EMPIRICAL FINDINGS AT THE FRONT-END DESIGN. P. Marques, A. Silva, E. Henriques, C. Magee.
675
2702 AUTONOMOUS SANITARY SYSTEM APPLIED TO HOSPITAL BEDS. Cândida Malça, Pedro Beirão.
677
2703 APPLICATION OF DISINFECTION SYSTEM TO HOSPITAL CURTAINS. Cândida Malça, Pedro Beirão.
2780 SALT: THE CONTRIBUTION OF INDUSTRIAL DESIGN IN THE REDUCTION AND STANDARDIZATION OF CONSUMPTION. Maria F. Silva, Pedro A. Moreira, Teresa M. Duarte, Patricia Padrão, Olivia Pinho, Luís Amaro.
681
3113 REENGINEERING THE CONCEPT OF URBAN CARS: A CASE STUDY. Irene Carvalho, António Araújo, Randolph Kirchain, Ricardo Simões, Arlindo Silva.
683
2995 CASE STUDY: DESIGN FOR MANUFACTURING - EMBRAER-EVORA
COMPOSITES ASSEMBLY LINE. Daniel C. Silva, Gustavo B. Guimarães, Antônio R. Lima Jr., Fábio S. Zenebon, André B.C. Carvalho.
685
2996 CASE STUDY: LEAN CONCEPTS - EMBRAER-EVORA WING ASSEMBLY LINE. André B.C. Carvalho, Daniel C. Silva, Gustavo B. Guimarães, José C. Mantovani Jr., Júlio C.S. Araújo.
687
2676 A GOLF BALL PICKING ROBOT DESIGN AND DEVELOPMENT. Nino Pereira, Fernando Ribeiro, Gil Lopes, Dan Whitney, F. Jorge Lino.
689
2659 SOME CONSIDERATIONS ABOUT THE USE OF TITANIUM SCREWS. Dario Croccolo, Massimiliano DeAgostinis, Nicolò Vincenzi.
691
2932 DESIGN SILICONE MOLDS FOR MANUFACTURING CERAMIC
MICROCOMPONENTS. Jorge Lino, Adalberto Silva, Teresa Duarte, Susana Olhero, José M.F. Ferreira.
693
3852 THE STRATEGY FOLLOWED DURING THE IDENTIFICATION CHARACTERISTICS OF THE PRODUCT IN HIGH VOLUME PRODUCTION. Remigiusz Labudzki.
695
2607 NOVEL DESIGN CONCEPT OF MAGNETORHEOLOGICAL DAMPER IN SQUEEZE MODE. Ali A. Alghamdi, A.G. Olab.
697
2658 STRESS CONCENTRATION FACTORS AT THE ROUNDED EDGES OF A SHAFT-HUB INTERFERENCE FIT. Dario Croccolo, Massimiliano DeAgostinis, Nicolò Vincenzi.
699
2769 APPLICATION OF SYNCHRONOUS SPINNING TECHNIQUE TO TRUNCATED-PYRAMIDAL-SHAPED METAL FORMING PRODUCTS. Ichiro Shimizu, Shuuichi Tanaka.
701
2812 DYNAMIC ANALYSIS OF AUTOMOTIVE GAGE PANEL. Alexander Janushevskis, Anatoly Melnikovs, Anita Gerina-Ancane, Janis Janusevskis.
703
2999 NUMERICAL AND EXPERIMENTAL ANALYSIS OF THE SINGLE POINT SHEETS INCREMENTAL FORMING PROCESS. Virgilio Fontanari, Matteo Benedetti, Stefania Bruschi, Antonio Fuganti.
705
2977 EXPERIMENTAL ANALYSIS OF AXIAL THRUST IN CENTRIFUGAL PUMPS. Vasant Godbole, Rajashri Patil, S.S. Gavade.
707
SYMP_06: NON-DESTRUCTIVE TESTING OF ADVANCED JOINING TECHNIQUES 709
2770 INSPECTION OF INTERNAL DEFECTS IN CFRP CIRCULAR TUBES BY THREE-DIMENSIONAL DIGITAL IMAGE CORRELATION METHOD. Wei-Chung Wang, Yao-Tang Chou, Ho-Yi Chieh, Jheng-Sian Wang.
711
2927 3D DIGITAL IMAGE CORRELATION USING A SINGLE HIGH-SPEED CAMERA FOR OUT-OF-PLANE DISPLACEMENTS AT HIGH RATES. Mark Pankow, Brian Justusson, Anthony Waas, Chian-Fong Yen.
713
2695 DETERMINATION OF THE STRAIN DISTRIBUTION IN ADHESIVE JOINTS USING FIBER BRAGG GRATING SENSORS. P.M.G.P. Moreira, Lucas F.M. Silva, A.L.D. Loureiro.
715
3043 EFFECT OF CURE TEMPERATURE ON THE GLASS TRANSITION TEMPERATURE OF AN EPOXY ADHESIVE. R.J.C. Carbas, E.A.S. Marques, A.M. Lopes, Lucas F.M. Silva.
2772 DEVELOPMENT OF THREE-DIMENSIONAL GRAIN MAPPING TECHNIQUE IN SPRING-8 AND EVALUATION OF PLASTIC STRAIN. Daiki Shiozawa, Yoshikazu Nakai, Kenta Tsutsumi, Ryotaro Miura, Kentaro Kajiwara.
719
2600 RELATIONSHIP BETWEEN DISSIPATED ENERGY AND FATIGUE LIMIT FOR AUSTENITIC STAINLESS STEEL. AKai Atsushi, Shiozawa Daiki, Sakagami Takahide, Ootobe Shogo, Inabe Ken.
721
3003 MEASUREMENT OF DAMAGE IN STEEL ABNT 8620, CAUSED BY FATIGUE USING END - BARKHAUSEN. Roberto F. Lorenzo.
723
SYMP_07: EXP. METHODS FOR MECH. CHARACT. OF POLYMER COMPOSITES 725
3126-IP CREEP FAILURE CRITERIA FOR POLYMER BASED MATERIALS. Rui M. Guedes (Invited Paper).
727
2623 EXPERIMENTAL STUDY OF THE CRACK GROWTH OF A CARBON FABRIC REINFORCED PPS UNDER MODE I AND MODE II LOADING CONDITIONS. Ives De Baere, Stefan Jacques, Mathias Kersemans, Wim Van Paepegem, Joris Degrieck.
729
2680 EXPERIMENTAL ASSESMENT OF INFRARED WELDED BONDS USING
LAPSHEAR, DOUBLE CANTILEVER BEAM AND END NOTCH FLEXURE TESTS FOR A CARBON FABRIC REINFORCED THERMOPLASTIC. Klaas Allaer, Ives De Baere, Stefan Jacques, Wim Van Paepegem, Joris Degrieck.
731
2984 SIZE EFFECTS ON THE TENSILE AND COMPRESSIVE FAILURE OF NOTCHED COMPOSITE LAMINATES. G.H. Erçin, Pedro P. Camanho, J. Xavier, S. Mahdi, P. Linde.
733
2654 FRACTURE PARAMETER EXTRACTION FROM DIC DISPLACEMENT FIELD IN EPOXIES. Stephen A. Jones, Rachel A. Tomlinson.
735
2546-IP EFFECTIVE MECHANICAL PROPERTIES OF PMMA REINFORCED WITH CNTS - EXPERIMENTS AND MODELING. Or Ben David, Leslie Banks-Sills, Jacob Aboudi, Ofer Raz, Amit Shlayer, Avi Ya'akobovich, Rami Eliasi, Victor Fourman (Invited Paper).
737
2560 EFFECT OF HYGROTHERMAL ENVIRONMENTAL ON THE MOISTURE ABSORPTION OF FABRIC COMPOSITE (GLASS/EPOXY). A. Naceri.
739
2652 ADVANCED ACCELERATED TESTING METHODOLOGY FOR LIFE PREDICTION OF POLYMER COMPOSITES. Yasushi Miyano, Masayuki Nakada.
741
2668 CHARACTERIZATION OF THE THERMAL DEGRADATION OF POLYMER FOAM MATERIALS USING DIC AND A MODIFIED ARCAN FIXTURE. Siavash T. Taher, Ole T. Thomsen, Janice M. Dulieu-Barton.
743
3063 EXPERIMENTAL STUDY OF MECHANICAL DISTURBANCES CAUSED BY A CYLINDRICAL INCLUSION IN A SOFT MATERIAL SUBJECTED TO CONTACT LOADING. X.H. Tan, Y.L. Kang, Q.H. Qin.
745
3014 WEAR AND FRICTION OF PBT-BASED MATERIAL IN DRY SLIDING AGAINST STEEL. Constantin Georgescu, Lorena Deleanu.
747
3025 AN EXPERIMENTAL AND FINITE ELEMENT STUDY OF THE TRANSVERSE BENDING BEHAVIOR OF T-JOINTS IN VEHICLE STRUCTURES. Giovanni Belingardi, Ermias G. Koricho.
749
3118 EXPERIMENTAL-NUMERICAL ANALYSIS OF MICROSCOPIC DISSIPATION MECHANISMS OF DUCTILE INTERFACES. Johan Hoefnagels, Jan Neggers, Olaf Sluis, Bart Vossen, Marc Geers.
751
3144 MECHANICAL PROPERTIES CHARACTERIZATION OF COMPOSITES
REINFORCED BY KNITTED FABRICS. Andrejs Krasnikovs, Olga Kononova, Galina Kharkova, Jevgeny Zalesskis, Vitalijs Lusis, Vitalijs Zaharevskis, Sandris Ruchevskis.
753
2655 MIXED-MODE (I/II) FRACTURE STUDY OF EPOXIES USING DIGITAL IMAGE CORRELATION. Stephen A. Jones, Rachel A. Tomlinson.
3038 STATIC AND DYNAMIC TESTS OF A GLASS REINFORCED PLASTIC BOGIE. Jan Chvojan, Jaroslav Vaclavik, Rayner Mayer.
757
3065 COMPRESSIVE RESPONSES OF VULCANIZED RUBBER UNDER QUASI-STATIC AND HIGH STRAIN RATE CONDITIONS. Wenjun Hu, Xicheng Huang, Fangju Zhang, Wei Niu, Yongmei Chen.
759
SYMP_08: RECENT ADVANCES IN NON-DESTRUCTIVE TESTING 761
2819 FUTURE APPLICATION FIELDS OF ACOUSTIC RESONANCE ANALYSIS IN NON-DESTRUCTIVE TESTING. M. Heinrich, S. Kurzenhäuser, T. Waschkies, F. Walte, M. Goebel, B. Valeske.
763
2700 OPTICAL AND INFRARED MONITORING TECHNIQUES APPLIED TO THE DEFECTS DETECTION AFTER INDENTATION OF JUTE/HEMP FIBRE HYBRID LAMINATES. S. Sfarra, C. Ibarra-Castanedo, C. Santulli, F. Sarasini, D. Paoletti, X. Maldague.
765
2782 NEW METHODOLOGY FOR STRUCTURAL HEALTH MONITORING OF GLARE IN SHIPS. Filipe L. Matos, Telmo G. Santos, S. Valtchev, J. PamiesTeixeira, R.M. Miranda.
767
2728 IDENTIFICATION OF A SURFACE CRACK BY ACTIVE PULSE ECHO METHOD USING PIEZOELECTRIC FILM. Shiro Kubo, Yuki Wataka, Takashi Ohigashi, Takahide Sakagami.
769
2715 NONDESTRUCTIVE TESTING USING GIANT MAGNETOSTRICTIVE MATERIALS AS AN ULTRASONIC SENSOR. Riichi Murayama, Witsarut Sriratana, Makiko
Kobayashi, Cheng-Kuei Jen.
771
2879 MEASUREMENT OF DISPLACEMENT FIELDS IN THE PRESENCE OF
DISCONTINUITIES BY AN ADAPTED DIGITAL IMAGE CORRELATION METHOD BASED ON SUBSET SPLITTING. Hassan Al Husseini, Jean Christophe Dupré, Pascal Doumalin, Arnaud Germaneau, Fabrice Brémand.
773
2738 THE FINITE ELEMENT SIMULATION OF LAMB WAVE PROPAGATION IN A CORRODED STRUCTURE WITH COUPLED FIELD ELEMENTS. Samaneh Tashi, Ali Abedian, Romik Khajehtourian.
775
2933 STUDY OF ULTRASONIC SENSING SYSTEM USING A LONG WAVEGUIDE WITH AN ACOUSTIC HORN. Riichi Murayama, Masayuki Kobayashi, Makiko Kobayashi, Cheng-Kuei Jen.
777
3052 PZT SENSORS APPROACHING FOR THE EVALUATION OF MULTIPLE IMPACT EFFECTS IN FIBRE GLASS COMPOSITE PLATES. Mário Santos, Jaime Santos, Ana Amaro.
779
SYMP_09: FIRE TESTING AND EXPERIMENTAL VALIDATION 781
2773 DETERMINATION OF FIRE RESISTANCE OF RC COLUMNS - NUMERICAL ANALYSES AND NEURAL NETWORK'S PROGNOSTIC MODELLING. M. Lazarevska, M. Cvetkovska, M. Knezevic, T. Samardzioska, A. Trombeva Gavriloska.
783
2774 TEST METHODS FOR DETERMINATION OF FIRE SPALLING OF CONCRETE. Robert Jansson, Lars Boström.
785
2813 STRUCTURAL FIRE TESTING - WHERE ARE WE, HOW DID WE GET HERE, AND WHERE ARE WE GOING?. John Gales, Cristián Maluk, Luke Bisby.
787
2830 DEFLECTION OF CONCRETE FLOOR SLAB DURING A FIRE TEST: TESTS AND MODELLING. David J. Lange, Johan Sjöström, Robert Jansson, Lars Boström.
789
3153 FIRE RESISTANCE TESTS ON CONCRETE COLUMNS. Cristina C. Santos, João P.C Rodrigues, Tiago A.C. Pires.
791
3802 3-POINTS BENDING TESTS ON CONCRETE AT HIGH TEMPERATURE. Hélène Carré, Pierre Pimienta.
2697 DIFFERENT FACTOR INFLUENCE ON THE REACTION TO FIRE PERFORMANCE OF WOOD MATERIALS. Edgars Buksans, Andris Morozovs.
795
2833 EVALUATION OF PERFORMANCE UNDER FIRE OF COMPRESSED EARTH BLOCKS. Márcio Buson, Nuno Lopes, Humberto Varum, Rosa Maria Sposto, Paulo VilaReal.
797
2846 MEASURING THERMAL MATERIAL PROPERTIES FOR STRUCTURAL FIRE ENGINEERING. Johan Sjöström, Robert Jansson.
799
3103 MECHANICAL PROPERTIES OF GYPSUM BOARDS AT HIGH TEMPERATURES. Ima Rahmanian, Yong-Chang Wang.
801
3152 EXPERIMENTAL TESTING ON THE RESIDUAL MECHANICAL PROPERTIES OF ORDINARY CONCRETES AFTER FIRE. Cristina C. Santos, João P.C Rodrigues.
803
2677 CONCRETE-FILLED STRUCTURAL HOLLOW SECTIONS IN FIRE: ACCOUNTING FOR HEAT TRANSFER ACROSS A GAP. David Rush, Eoin O'Loughlin, Luke Bisby.
805
2776 ROBUSTNESS OF COMPOSITE STEEL-CONCRETE OPEN CAR PARK BUILDINGS SUBJECT TO LOCALISED FIRE. Cécile Haremza, Aldina Santiago, Luís Simões da Silva.
807
2809 EXPERIMENTAL TESTS OF PARTIALLY ENCASED BEAMS AT ELEVATED AND ROOM TEMPERTURE. Paulo A.G. Piloto, Ana B.R. Gavilán, Luís M.R. Mesquita, Luísa Barreira, Carlos Gonçalves.
809
3062 FIRE PERFORMANCE OF STEEL HOLLOW COLUMNS FILLED WITH CONCRETE, REINFORCED CONCRETE AND FIBER REINFORCED CONCRETE. Tiago A.C. Pires, João P.C. Rodrigues, José J.R. Silva, António M. Correia.
811
3170 EXPERIMENTAL AND NUMERICAL SIMULATION OF A NATURAL FIRE IN A COMPARTMENT. C.J.M. Teixeira, J.P.C. Rodrigues, P. Barata, T.A. Pires.
813
3810 BEHAVIOUR OF THE REVERSE CHANNEL CONNECTION BETWEEN AN I-BEAM AND CFT COLUMNS IN THE FULL-SCALE FIRE TESTS. Fernanda Lopes, Aldina Santiago, José G.S. Silva, Luís S. Silva.
815
SYMP_10: EXPERIMENTAL CHARACTERIZATION OF RENEWABLE COMPOSITES 817
3835-IP DESIGN FOR SUSTAINABILITY WITH COMPOSITE SYSTEMS. A.T. Marques, José Luís Esteves, Júlio Viana, Nuno Loureiro, Alberino Arteiro (Invited Paper).
819
2743 EXPERIMENTAL STUDY OF THE MECHANICAL PROPERTIES OF
UNIDIRECTIONAL FLAX FIBER COMPOSITE. E. Sparnins, J. Modniks, J. Andersons.
821
2856 MECHANICAL CARACTERISATION OF POLYESTER RESIN AND CORN NATURAL FIBERS COMPOSITE. Luis Queijo, João Rocha.
823
3097 BUGGY BONNET EXPERIMENTAL MODAL ANALYSIS. Samuel Furtado, Arlindo Silva, António R. Ribeiro, Cristiano Alves.
825
3824 MECHANICAL BEHAVIOUR OF COMPOSITE MATERIALS WITH LONG JUTE FIBERS. José L. Esteves, T. Estevão, O. Ferreira, C. Fernandes.
827
SYMP_11: TRIBOLOGY IN MECHANICAL COMPONENTS AND MACHINE ELEMENTS 829
3776-IP STRATEGY FOR TRIBOLOGY TESTING AND DESIGN THROUGH THE NASA TECHNICAL READINESS LEVEL (TRL) SYSTEM. Vern Wedeven, Graham Wedeven, Steve Kratz (Invited Paper).
831
3813 EFFECT OF ADDITIVES ON SURFACE PERFORMANCE. Pawel Rycerz, Amir Kadiric, Rihard Pasaribu, Guillermo M. Espejel, Andy V. Olver.
833
3722 FATIGUE LIFE OF MACHINE ELEMENTS - SOLID CONTAMINATION. Fabrice Ville, Sandrine Coulon, Ton Lubrecht.
3744 M50NiL ABRASIVE WEAR RESISTANCE. David A. Haluck, Herbert A. Chin, William Black.
837
3751 SIMULATION OF A PROGRESSIVE MICROPITTING TEST. José A. Brandão, Ramiro Martins, Jorge O. Seabra, Jorge Castro.
839
2759 BEHAVIOUR OF LUBRICATING GREASES IN A TRIBOLOGICAL CONTACT. Kuhn, Erik.
841
3812 MODELLING ELASTO-HYDRODYNAMIC LUBRICATION USING CFD. Alireza Hajishafiee, D. Dini, T. Zaki, A. Kadiric, S Ioannides.
843
3202 FILM THCKNESS IN A BALL-ON-DISK CONTACT LUBRICATED WITH GREASES, BLEED OILS AND BASE OILS. T.A. Cousseau, M. Bjorling, B. Graça, A. Campos, J. Seabra, R. Larsson.
845
3047 AN ANALYSIS OF FAN ROLLER BEARING FAILURE. Tatjana Lazović, Ljubica Milović, Svetislav Marković, Mileta Ristivojević.
847
2604 FAILURE MECHANISM OF COUPLING OF SUCKER ROD. Deli Duan, Zhe Geng, Shengli Jiang, Shu Li, Srdjan Nešić.
849
3142 IMPROVING REALIBILITY OF WIND TURBINE GEARBOXES THROUGHT OIL ANALISIS. Beatriz Graça, Jorge Seabra.
851
2646 REDUCTION OF GEARBOX LOSSES BY OPTIMIZED TOOTH GEOMETRY AND THERMAL MANAGEMENT. K. Stahl, B.R. Höhn, K. Michaelis, H.P. Otto, J. Geiger.
853
3040 CALCULATING THE OIL SUMP TEMPERATURE AND HEAT CARRYING CAPACITY OF PLANETARY GEARS. Attila Csobán, Mihály Kozma.
855
3714 EXPERIMENTAL EVALUATION OF THE STABILIZATION TEMPERATURE TESTING LOW-LOSS GEARS IN THE FZG GEARBOX. L. Magalhães, R. Martins, J. Seabra.
857
2558 AN INVESTIGATION OF SHRINKAGE EFFECTS ON PEEK GEARS. Wei Li, Geoff Small, Ken Mao.
859
3105 A VIBRATION MONITORING SYSTEM FOR DETECTING PITTING DAMAGE IN SPUR GEAR TESTS. Edoardo Conrado, Carlo Gorla.
861
3140 COMPARISON OF TRIBOMETRICAL AND REAL ENGINE TESTING FOR THE WEAR OF PISTON-RING CYLINDER-LINER CONTACT. Claudia Lenauer, Karoline Steinschütz, Charlotte Besser, Thomas Wolpeka, Martin Jech.
863
3746 AISI 440C/440C STAINLESS STEEL TRIBOLOGICAL PERFORMANCE IN
KEROSENE AND HYDRAULIC FLUIDS . Herbert A. Chin, David A. Haluck, Matthew Disselkoen, William Black.
865
2605 A STUDY ON EROSION BEHAVIOR OF NEW SIC REINFORCED CERAMIC. Shu Li, Ronghua Liu, Deli Duan, Ronglu Zhang, Yang Liu.
867
3745 FRETTING UNDER COMBINED MOTION: A SYSTEM RELEVANT TEST METHODOLOGY. Eli Ross, Matthew Disselkoen, Vern Wedeven.
869
2971 PROCESSES DEVELOPMENT DURING CHEMICAL MECHANICAL POLISHING (CMP). Filip Ilie.
871
3066 SELF-ORGANIZATION IN TRIBOLOGICAL JOINTS: THE EFFECT OF SELECTIVE TRANSFER OF MATERIAL BETWEEN SURFACES. Emilia Assenova, Mara Kandeva.
873
3127 ON THE OCCURRENCE OF NEGATIVE GROOVE FLOW RATE IN TWIN GROOVE HYDRODYNAMIC JOURNAL BEARINGS. Francisco P. Brito, A.S. Miranda, J.C.P. Claro, José C. Teixeira, Lucrécio Costa, F. Fillon.
875
2718 EXPERIMENTAL INVESTIGATION OF POROUS METAL BEARINGS. Aleksandar B. Marinkovic, Tatjana M. Lazovic, Milos B. Stankovic.
877
2881 A NOVEL THEORETICAL APPROACH FOR THE FAST EVALUATION OF SURFACE TEXTURING EFFECTS ON FRICTION AND LOAD SUPPORT IN HYDRODYNAMIC BEARINGS. Michele Scaraggi, Giuseppe Carbone.
