Development of bio- and eco-composites for the footwear industry
Texto
Documentos relacionados
Fractures were made in all samples. Figure 1 shows fractures of test bars cast from the examined high-aluminium iron in base condition and with the addition of vanadium
Technical Institute, University of Rzeszow, Rejtana 16a, 35-111 Rzeszow, Poland *Corresponding author. The surface layers of the tested steels were remelted with the electric
Para confirmação dos resultados, foi analisado através de amostra complementar, o segmento financeiro e de utilidade pública, devido a predominância de empresas desses
[r]
Figure 6: Variation of the storage modulus with the temperature for the pure epoxy and the composites reinforced with different volume fractions of ramie fibers.. For polyester
This study investigated the combined effect of adhesive type and content on the dimensional stability and mechanical properties of three-layer particleboards made from a mixture
The component labelled “Reducible” corresponds to the fake and non-prompt lepton background and is estimated from data as described in section 6.2 ; the other backgrounds are
Para determinar o teor em água, a fonte emite neutrões, quer a partir da superfície do terreno (“transmissão indireta”), quer a partir do interior do mesmo