• Nenhum resultado encontrado

Voltammetric characteristics of miconazole and its cathodic stripping voltammetric determination

N/A
N/A
Protected

Academic year: 2019

Share "Voltammetric characteristics of miconazole and its cathodic stripping voltammetric determination"

Copied!
8
0
0

Texto

Loading

Imagem

Fig. 1 – Differential pulse polarograms obtained for 5.0 × 10 − 4 mol L –1 of miconazole in pH 8.0 (Curve A) in pH 12.0 (Curve B).
Fig. 2 – Cathodic Stripping voltammograms obtained for 1.0 × 10 − 6 mol L –1 of miconazole in B-R buffer pH 8.0
Fig. 4 – Influence of accumulation time on peak current intensity for 1 × 10 − 6 mol L –1 of miconazole in B-R buffer pH 8.0
Fig. 6 – Reduction scheme of clotrimazole on mercury electrode.

Referências

Documentos relacionados

A validated, simple, sensitive, precise and selective stability-indicating square-wave adsorptive cathodic stripping voltammetric method was described for the trace

voltammetric proposed method for determination of vitamin B 6 presented good accuracy and the experimental results demonstrated that the CrHCF-modified glassy carbon electrode has

Stripping Voltammetric Determination of Cadmium in Sea Water using a Carbon Paste Electrode Modiied with Alginic Acid from Brown Algae.. Carolina Muñoz,* Manuel Zúñiga and

Based on the adsorption character of investigated flavonoids onto the surface of the HMDE, validated, simple, fast and sensitive square-wave cathodic adsorptive stripping voltammetric

A stripping method for the determination of the antiretroviral drug efavirenz at the submicromolar concentration levels in diluted alkaline electrolyte is

The developed stripping voltammetric method was successfully applied for quantitation of irbesartan in pharmaceutical formulations and spiked human serum, without the

On Site Stripping Voltammetric Determination of Zn(II), Cd(II) and Pb(II) in Water Samples of the Cananéia-Iguape Estuarine-Lagoon Complex in São Paulo State, Brazil..

The purpose of this work is to investigate the voltammetric behavior and the possibility of TC determination using a 60% (graphite, m/m) bare graphite-polyurethane composite