• Nenhum resultado encontrado

Analysis of quality and cost of FeSiMg treatment master alloy vs. cored wire in production of ductile cast iron

N/A
N/A
Protected

Academic year: 2017

Share "Analysis of quality and cost of FeSiMg treatment master alloy vs. cored wire in production of ductile cast iron"

Copied!
4
0
0

Texto

Loading

Imagem

Fig. 3. The photomicrographs showing differences in nodule       count and characteristics of the Tundish ladle treatment with (a)

Referências

Documentos relacionados

On the other hand, it is very well known that oral iron is a less than ideal treatment mainly because of gastrointestinal AEs (particularly when using ferrous iron compounds), lack

It is very well known that oral iron is a less than ideal treatment mainly because of gastrointestinal adverse effects (particularly when using ferrous iron compounds), lack

The objective of the present work is to investigate the morphology of compacted graphite in vermicular cast iron using manual serial sectioning and the three-dimensional

To obtain deposits of high Cr white cast iron (Fe-Cr-C alloys) with different microstructures, a modification of the self-shielded flux cored welding (S-FCAW) process was designed,

microstructure anaIysis were etched with use or FcCI3 for chromium cast iron and casl stccl padding wcld and Nital for nodular cast imn.. Hopper with

In foundry A were monitored stability and operational impacts on the dissolution of modifier such as influence of pre- heating of the reaction chamber and the

The addition of alloying elements in the ductile irons increased the hardness of the as-cast materials, as can be seen in Figure 6. It is also noticed that with the increase of

Fica evidenciado aqui que a definição de economia não está associada apenas a distribuição, e consumo de bens e serviços, mas também na atividade que o Estado