Dental Press J. Orthod. vol.16 número5 en a12v16n5

Thus, the present study aimed to evaluate the efect of PAA at diferent contact times on bioilms produced on polystyrene microplates and stainless steel coupons by L.. monocytogenes

This study was conducted in order to examine the main fracture characteristics in the transverse rupture strength test (TRS) of a high speed steel (HSS) AISI M2 produced by

The aim of this study was to assess the surface friction produced by self-ligating stainless steel brackets equipped with a resilient closure system and compare the

The aim of this study was to assess the frictional forces produced by stainless steel SL brackets with a passive mechanism under zero and 2.5° of angu- lation and to compare

Thus, the aim of this study was to test the hypoth- esis that there would be no difference in the mechan- ical performance between stainless steel wires and stainless steel wires

With regard to surface morphology, the super- elastic NiTi wires by Masel and Morelli present- ed the lowest wire-surface roughness, while the superelastic and heat-activated NiTi

The aim of this study was to assess, by means of cone-beam computed tomography (CBCT), the short-term effects produced by RME on upper air- way dimensions, as well as to

An experimental in vitro study was conducted to investigate potential changes in the physical proper- ties in different lots of the same commercial brand of orthodontic wires,