• Nenhum resultado encontrado

Rev. IBRACON Estrut. Mater. vol.7 número1

N/A
N/A
Protected

Academic year: 2018

Share "Rev. IBRACON Estrut. Mater. vol.7 número1"

Copied!
11
0
0

Texto

Loading

Imagem

Figure 1 – Truss mode scheme in plan with  struts start points in the column cross section
Figure 2 – Truss model scheme in perspective  with struts (red bars) and ties (green bars)
Table 2 – Results of pile caps design
Figure 6 – Reinforcements simulating the  steel bars of the pile cap and columnTable 3 – Constitutive model
+6

Referências

Documentos relacionados

[03] A. Gupta, “Combined Membrane and Flexural Reinforce- ment in Plates and Shells,” Journal of Structural Engineering - ASCE, vol. Chan, “Nonlinear Analysis of Rein- forced

The damage model developed by [3] is used in the analyses of reinforced concrete beams submitted to permanent and accidental variable loadings with the changes in the

The continuum damage is introduced in elastic constitutive law using the effective stress concept (that oc- curs on the undamaged part with defects) and the strain equivalence

Figure 10 shows the stress distribution in the model with values presented in MPa in the description, together with the cracking and the deformed structure in the load step when it

However, the thermal parameters used during the analysis are not the same as the ones recommended by EC 4 [6], which suggests a 0.7 emissivity for any material exposed to ire and

The models of the monolithic pile cap and precast pile caps with the roughened conformation of the walls of the socket and the column showed characteristic behaviors of rigid

This work presents a study on the behavior of reinforced concrete beams strengthened in bending by the addition of concrete and steel on their tension side and having expansion

The strain measured in pile caps tensile reinforcement, the section containing the axis of the pile, there seems to be a great inluence of of the column section because in models