• Nenhum resultado encontrado

Investigation of sintering in electroceramics by thermodilatometry

N/A
N/A
Protected

Academic year: 2017

Share "Investigation of sintering in electroceramics by thermodilatometry"

Copied!
10
0
0

Texto

Loading

Imagem

Fig. 1 shows also the thermodilatometric curve of a sample which was thermally  treated during 44 h at 490 °C (the black curve)
Fig. 2. Thermodilatometric curve for 1050 °C.
Fig. 4. Thermodilatometric curves for isothermal heatings at 700 °C, 800 °C and the  corresponding theoretical fits
Fig. 6. Bulk and matrix density and porosity of the samples. (฀ – bulk density, ◊ – matrix  density, Δ – porosity)
+3

Referências

Documentos relacionados

Although the strength of composites that contain hard particles (ceramics) increases with the volume percentage of particles in the composite, an increase in sintering

2 XRD of the sample obtained by the microwave irradiation at time of the 15 min and submitted to sintering compared with the sample prepared by the conventional solid-state reaction

No regulamento, podemos encontrar várias obrigações às quais os sujeitos passivos de imposto estão vinculados, nomeadamente obrigações declarativas, de faturação,

62 Silva et al. Schematic of the hardmetal solid state sintering mechanism: a) in the green body, around each Co particle there is a group of WC particles; b) a thin Co layer

In this paper, the sintering kinetics of silicon In this paper, the sintering kinetics of silicon carbide ceramics has been studied with the help of additives based on the (SiO 2

A glass-ceramic composition based on the LZSA system was produced by sintering and crystallization of a parent glass powder (3.68 µ m average particle diameter).

It was realized that increasing sintering temperature in HTHP sintering method results in increasing density but hardness and compression strength increase by increasing

It favors sintering leading to solids with low surface areas but in the presence of chromium sintering is delayed and this results in catalysts with higher