C-LOAD POWER CONTROL PROTOCOL-CROSS-LAYER DESIGN OF A NETWORK LAYER LOAD POWER CONTROL PROTOCOL IN WIRELESS AD HOC NETWORKS
Texto
Imagem
Documentos relacionados
cromatográfica: redução de RNA, níveis gDNA e endotoxinas; possibilidade de scale- up Perda de pNA durante a etapa de lavagem; baixos rendimentos; formação da tripla
O protocolo de comunicação 6LoWPAN (IPv6 Over Low Power Wireless Personal Area Networks) e o protocolo de encaminhamento RPL (IPv6 Routing Protocol for Low-Power and Lossy
It proposes an extension of the M2M H-NDMA protocol for a multi base station scenario and a power control scheme to adapt the protocol to the requirements of URLLC.. The system
Thus, setting up challenging task in the presence of various factors, including but not limited to high bit error rate, contention, mobility a graphical representation of the
The adaptive power control problem in wireless mesh networks is that of choosing the transmit power level for each packet at each transmitting node, in a distributed fashion..
so we have developed intelligent power management protocol.by using this protocol we can substantially reduce the power consumption of a wireless gas sensor node, this is
O processo de sistematização participativa per� processo de sistematização participativa per� de sistematização participativa per� per� mitiu verificar que os cursos
This paper presents a nonintrusive load identification and characterization model with real power and impedance by using artificial neural network.. The approach involved the use