Design of Active Integrated Antenna for Dual Frequency Image Rejection
Texto
Documentos relacionados
The entire above can implies that the proposed antenna has two rejection frequencies .The lower at 5-6GHz for WLAN is mainly determined by the rectangle slot and
The software used to model and simulate the Sierpienski & Crown Square Fractal Shapes Slotted Microstrip Patch Antenna was IE3D, it can be used to calculate
The computer simulation results show that the antenna can realize wide band characters with each band having good impedance bandwidth (VSWR ≤ 2) for all the three
The three proposed antennas are simulated using Sonnet software, under the same conditions and results compared with the conventional rectangular patch antenna, and the shape with
Multiple-input and multiple-output (MIMO) technology is proposed to meet these purposes .An antenna for MIMO application which contains two or more antennas that
These can be explained due to the fact that the antenna gain is optimized by the resonant frequency, but in this paper the rectangular patch and triangular slot
After the acquisition of image frames, image segmentation can be performed using background subtraction, depending on the frame rate of the video sequences.. 3.1.1
In this paper, an attempt has been made to reduce the size of microstrip antenna, with improved bandwidth, gain without any complexity in design by using inverted patch