• Nenhum resultado encontrado

Effect of Temperature on the Toughness of Locally Manufactured Low Alloy Steel SUP9 Used for Manufacturing Leaf Springs

N/A
N/A
Protected

Academic year: 2016

Share "Effect of Temperature on the Toughness of Locally Manufactured Low Alloy Steel SUP9 Used for Manufacturing Leaf Springs"

Copied!
10
0
0

Texto

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)

Referências

Documentos relacionados

Keeping all other machining parameters same, the hardened work material was machined with the two electrodes at different values of peak current, pulse-on time & duty

This article examines the effect of prolonged time of holding at the temperature of 620 0 C on the processes of secondary phase precipitation and mechanical properties of

These results show that although in all temperatures obtained particles exhibit a similar change from irregularly shaped agglomerates with rough surfaces to more

Also, at higher laser power, as the scanning speed was reduced, the solidification process became slow thereby allowing most of the gasses in the melt pool to escape before

The aim of this study is to study the effect of temperature and acid concentration using Arrhenius Equation transition state equation and reaction rate kinetic

Due to the changes in morphology observed in the TEM micrographs of SCV cells following exposure to 4 u C, it was hypothesised that there would be concomitant changes in composition

studies evaluating the effect of pH and temperature on the activity of different phytases were published (Wyss et al. The objective of the present study was to determine the

es and othe oblem in eng STM A743 ns were test on factors, K fatigue limit This approac ecimens wer e notch redu o conclude.. r’s empirical