• Nenhum resultado encontrado

The comparison of the structure and microhardness of the tool steel C90 and HS 6-5-2 remelted with the electric arc

N/A
N/A
Protected

Academic year: 2017

Share "The comparison of the structure and microhardness of the tool steel C90 and HS 6-5-2 remelted with the electric arc"

Copied!
4
0
0

Texto

Loading

Imagem

Fig. 2. Dendritic cells in the remelting zone of the C90 steel
Fig. 6. Fragment of the dendrite in the remelting zone of the high  speed HS 6-5-2 steel
Fig. 10. Microhardness changes of the HS 6-5-2 steel remelted  with the electric arc before and after tempering; measured on the  track perpendicular to the direction of remelting 0,1 mm under the

Referências

Documentos relacionados

i) A condutividade da matriz vítrea diminui com o aumento do tempo de tratamento térmico (Fig.. 241 pequena quantidade de cristais existentes na amostra já provoca um efeito

não existe emissão esp Dntânea. De acordo com essa teoria, átomos excita- dos no vácuo não irradiam. Isso nos leva à idéia de que emissão espontânea está ligada à

Ousasse apontar algumas hipóteses para a solução desse problema público a partir do exposto dos autores usados como base para fundamentação teórica, da análise dos dados

didático e resolva as ​listas de exercícios (disponíveis no ​Classroom​) referentes às obras de Carlos Drummond de Andrade, João Guimarães Rosa, Machado de Assis,

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

Na hepatite B, as enzimas hepáticas têm valores menores tanto para quem toma quanto para os que não tomam café comparados ao vírus C, porém os dados foram estatisticamente

Remelted zone of the probes after treatment with current intensity of arc plasma – 100 A, lower bainite, retained austenite and secondary cementite.. Because the secondary

Technical Institute, University of Rzeszow, Rejtana 16a, 35-111 Rzeszow, Poland *Corresponding author. The surface layers of the tested steels were remelted with the electric