• Nenhum resultado encontrado

Mat. Res. vol.12 número3

N/A
N/A
Protected

Academic year: 2018

Share "Mat. Res. vol.12 número3"

Copied!
5
0
0

Texto

Loading

Imagem

Table 2. The Objectives of the flux designer and the corresponding models.
Table 3. Comparison of single objective MP model results with experimental results.

Referências

Documentos relacionados

O extrato etanólico bruto pilular da folha de Lippia sidoides Cham., selecionado no teste preliminar, apresentou atividade para os 45 100% isolados clínicos de diferentes espécies

A new welding method which allows the assembly of two titanium nitride coated titanium parts is proposed. The welding procedure utilizes the possibility for pulse-shaping in

Factorial design, which has been widely used in other areas of arc welding technology, is inadequate for welding flux formulation because flux properties depend on

Assim sendo, com base na exploração dos fundos do Arquivo do actual Instituto Português de Santo António em Roma, pretendemos apresentar os resultados deste trabalho

microstructure anaIysis were etched with use or FcCI3 for chromium cast iron and casl stccl padding wcld and Nital for nodular cast imn.. Hopper with

Pela análise da figura 4.15 foi possível constatar a relação entre desgaste e aumento de dureza, ou seja, materiais mais moles, inicialmente, submetidos ao

Through the development of remote sensing techniques, various types of change detection algorithms have been emerging and applied in different application areas so as to determine

Among the therapeutic resources that promote the healing process, electrotherapy is one of the most used techniques in the treatment of skin wound because the application of