• Nenhum resultado encontrado

Continuum Modelling and Numerical Simulation of Damage for Ductile Materials

N/A
N/A
Protected

Academic year: 2021

Share "Continuum Modelling and Numerical Simulation of Damage for Ductile Materials"

Copied!
314
0
0

Texto

Loading

Imagem

Figure 3.1. (a) Schematic representation of the stress vector    ⃑⃑⃑⃑⃑   on the principal  stresses space and (b) definition of the Lode angle on the π-plane
Figure 3.3. Representation on the space of stress triaxiality versus Lode angle.
Figure 3.7. Geometry of the cylindrical smooth and notched bars, and for the flat  grooved plate specimens (dimensions in mm), see Bai (2008)
Figure 3.8. Finite element meshes for the cylindrical smooth and notched bar  specimens
+7

Referências

Documentos relacionados

O jogo didático desenvolvido no âmbito desta dissertação foi realizado com o intuito de ajudar a aprendizagem de conhecimento de literacia financeira, desta forma foi feito

DERS includes six factors reflecting the multi-faceted nature of emotion regulation: (a) Non-Acceptance of Emotional Responses (non-acceptance), with six items reflecting a

The models proposed include a constitutive model for the material being cut based on the work of Weber, a model for the shear plane based on Merchants model,

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

In the upstream direction, it is reasonable to incorporate some of the dynamics of the supplier(s) and not to go further than that. The model is based on the supply chain

The ZB model was based on the widely used discrete ordinates (S N ) formulation of neutron transport theory [7] and on a numerical method ⎯ the spectral Green’s function (SGF)

The numerical results for the axial buckling of CNTs are derived and the proposed beam model based on nonlocal boundary conditions is validated through comparison