• Nenhum resultado encontrado

Processing and structure of laminated iron-intermetallics composites

N/A
N/A
Protected

Academic year: 2017

Share "Processing and structure of laminated iron-intermetallics composites"

Copied!
6
0
0

Texto

Loading

Imagem

Fig. 2. Scanning electron micrographs showing the diffusion joints  developed for Fe-Cu and Cu-Ti couples annealed at 850  0 C for 10
Fig. 6. The energy spectrum for emitted X rays for Ti 2 Cu
Fig. 9. Optical and scanning electron micrographs showing   a typical microstructure of the laminated composite produced from

Referências

Documentos relacionados

Sintering of mixed titanium and calcined powders at 1000 ºC, led to the formation of composites of titanium, hydroxyapatite, titanium oxide, and calcium titanate..

Though a lot of works have been conducted on laser cladding of grey cast iron to enhance the hardness and wear resistance using carbon and Fe-based powder 7,8 , there is

Figure 5 – Fe content of goethite and hematite iron oxides (Fe Hm+Gt ) and maghemite iron oxides (Fe Mh ) and the magnetic susceptibility at low frequency ( χ lf ) (details) of

Nesse sentido, Oliveira (2007) alerta para um importante fator na compreensão das relações intergeracionais em que os avós funcio- nam como perpetuadores da cultura familiar e

When the carbon surface is homogeneously and almost entirely coated with tin dioxide and platinum nanoparticles, low oxidation peak current densities are observed (Pt/SnO 2 /C-1). SnO

Para dar vida às noites de Verão, o Contato – Hotel Marriott, presenteará todos com música ao vivo, no mês de Julho.. Será o momento ideal para desfrutar de uma bebida

6 Entre tantos mistérios no mundo, a história do dilúvio é mais um fenômeno muito interessante. A história mitológica não é contada apenas por um povo. Como

Não se pretende de forma alguma substituir a execução prática, absolutamente fundamental para a aquisição de determinadas competências processuais, no entanto a