• Nenhum resultado encontrado

Built-in self test of high speed analog-to-digital converters

N/A
N/A
Protected

Academic year: 2021

Share "Built-in self test of high speed analog-to-digital converters"

Copied!
21
0
0

Texto

Loading

Imagem

Table 1 - Summary of advantages and disadvantages of BIST.
Fig. 1. Overview of the proposed idea.
Fig. 2. Proposed BIST architecture for coherent testing of high speed ADCs.
Table 2 – Programmable parameters and frequency map for a 6-bit ADC.
+5

Referências

Documentos relacionados

O incentivo à leitura pela escola pode ser feito por meio de diversos recursos, um deles é a contação de histó- rias. Para contar uma história é necessário, em primeiro

The use of a rebound hammer test was the irst test possibility to be considered due to its simplicity and low cost. This test is based on the evaluation of a mass rebound after

The objective of this research was to quantify the influence of the cutting speed, feed per tooth and depth of cut, mainly at high-speed machining, on the microhardness

In this study, a two-ring tribology testing machine was used to simulate sliding state of ball screw under high load and high sliding speed and also analyzed and explored the

Abstract —This paper shows the design and post-layout simulation of an integrated analog-to-digital interface for energy quality meter systems, in which voltages

In this work we have used the Pascal matrix to transform the analog low-pass transfer function to the discrete transfer functions of the low-pass, high-pass, band-pass and

Control of TB, a global disease that affects millions of people every year, highly relies on the development of better preventive strategies as the only vaccine in use (BCG) is

In summary, provided that we disregard the reference spurs (since we know exactly where they appear and also know they are merely an artifact introduced by the PLLs and not by the