• Nenhum resultado encontrado

Lat. Am. j. solids struct. vol.14 número12

N/A
N/A
Protected

Academic year: 2018

Share "Lat. Am. j. solids struct. vol.14 número12"

Copied!
26
0
0

Texto

Loading

Imagem

Figure 1: Geometry and notations of a sandwich plate.
Figure 2: Representation of layerwise kinematics and coordinate system.
Figure 3: Geometry and corresponding DOFs of the present element.
Table 1 shows the boundary conditions, for which the numerical results have been obtained,  where CCCC, SSSS, CSCS and CFCF respectively indicate: fully clamped, fully simply supported,  two opposite edges clamped and other two simply supported, two opposi
+7

Referências

Documentos relacionados

Once has been compared the different behavior between the straight and the curve section, it is going to be compared the different vibrational response for both sleepers.. First,

Taking into account that the average sectional loss of reinforcing steel bars in real struc- tures is difficult to be evaluated and there is no nondestructive method available

A secant function based shear deformable finite element model is developed for the flexural behavior of laminated composite and sandwich plates with various

In this paper, static and dynamic analysis of functionally graded skew plates based on three di- mensional elasticity and graded finite element method is investigated.. For the

The vibration behavior of functionally graded beams reinforced by randomly oriented SWCNT’s on elastic foundations is studied using a mesh-free method.. Three different types of

2010a,b) buckling/bifurcation analysis aiming at studying the distortional buckling modes and lengths involved in the selected beams failures, (ii) perform non-linear analysis in

The amplitude of this strain signal contributed to fatigue damage for the coil spring based on the editing process using the Wavelet Transform analysis... analysis was conducted

Because of this, the velocity ratio method was proposed, which can estimate the axial force of the structure using the ratio of flight time of longitudinal waves to transversal