Mat. Res. vol.20 número6
Texto
Imagem
Documentos relacionados
The objective of the present work was to evaluate welding of thin sheets (thickness < 1 mm) of similar and dissimilar NiTi alloys with AISI 304 stainless steel using the
The aim of this study was to assess the frictional forces produced by stainless steel SL brackets with a passive mechanism under zero and 2.5° of angu- lation and to compare
A empresa vencedora poderá retirar o instrumento equivalente (Nota de Empenho) na Reitoria do IFRJ à Rua Pereira de Almeida, 88 - Praça da Bandeira - Rio de Janeiro/RJ. A
The goal of this study was to examine the changes caused in stress corrosion cracking and the critical pitting temperature behavior of a UNS S31803 duplex stainless steel due
From the 12 studies included (13 entries) in this meta-analysis, they all started from the same research assumption, in which the elderly with classifications according to the
The present work is devoted to study the corrosion behavior of iron and AISI 304 stainless steel in neutral aqueous solutions of tungstate containing chloride ions, by using
The aim of this work is to evaluate the effect of cold rolling on the electronic properties of the passive film formed on the ISO NBR 5832-1 austenitic stainless steel and
The aim of this study was to evaluate the mechanical behavior of reciprocating endodontic files, comparing nickel- titanium (NiTi) and stainless steel 316L (St.St. 316L)