Oscillatory Flow and Heat Transfer Within Parallel-plate Heat Exchangers of Thermoacoustic Systems
Texto
Imagem
Documentos relacionados
Fig. Homogenized heat transfer coefficient for 10.. 3) For small size of the inclusions a 1 and various values of heat transfer the equivalent heat transfer parameter
A neural network model and a comparison of the model with experimental and CFD simulation results had not previously been applied to predict heat transfer and flow friction of
Heat Transfer Coefficient in a Shallow Fluidized Bed Heat Exchanger with a Continuous Flow of Solid Particles This work shows the experimental study of a continuous
The heat transfer coefficient increased with increasing heat flux and mass velocity, but strong heat flux dependence was observed, mainly in the lower vapor
After leaving the compressor, in first place, the high pressure gas flow is normally precooled with the assistance of the heat sink and then passes through several heat
A conjugate (coupled) forced convection heat transfer from a heated conducting plate under turbulent boundary layer flow is considered.. A heated plate of finite thickness is
The model should also include well-known equa- tions for heat transfer coefficient in heat exchangers; for physical properties of nitrogen, heptane, water steam and polymer
Khan [24] studied the heat transfer characteristics and pressure drop condition for a ammonia with 30 0 chevron angle in chevron type plate heat exchanger and