• Nenhum resultado encontrado

Lat. Am. j. solids struct. vol.12 número8

N/A
N/A
Protected

Academic year: 2018

Share "Lat. Am. j. solids struct. vol.12 número8"

Copied!
14
0
0

Texto

Loading

Imagem

Figure 1: Wheel/WFT coordinates systems (a) and the elastic body of the WFT  (b) (developed at SEU refer to Lin et al., 2013; Lin et al., 2014; Chen et al., 2014)
Figure 2:  The elastic beam and the deformations (Case.1 represents the tensile and compressive deformation;
Figure 3: Strain-gauges arrangement (a) and the Wheatstone bridge connection mode.
Figure 4: FEM results of inertia load for   F x  (a),   F y  (b),  M x  (c) and   M y  (d), respectively
+4

Referências

Documentos relacionados

Local/Distortional/Global Buckling Mode Interaction on Thin Walled Lipped

Regarding the coupling formulation a third degree polyno‐ mial is adopted to describe the displacement and rotations of the reinforcement, while a linear polynomial is

[r]

This study has investigated the effect of Young’s modulus variations of the disc brake compo- nents on the squeal propensity using a detailed three dimensional finite element

Furthermore, the tip displacements at different firing angles were determined by transfer- ring the mass, stiffness and damping matrices of the barrel with the addition of

In this paper two uncertainty approaches were used to evaluate the dynamic responses of a flexible rotor supported by oil film bearings, namely fuzzy and stochastic analyses.. Two

Figure 23 shows the lateral axis transmissibility defined as the relation of the Laplace transforms of the X axis acceleration at the center of moving platform to the transform

In this paper an adaptive fuzzy sliding mode controller is proposed to improve the performance of a pneumatic isolator in the low frequency range, i.e., where the passive