ECO-FRIENDLY GREEN INHIBITOR TO IMPROVE THE STRENGTH OF CONCRETE CONTAMINATED BY CHLORIDE AND SULPHATE
Texto
Imagem
Documentos relacionados
[5], their concrete containing rubber, even with lower mechanical strength and tensile strength, when compared to concrete without the residue, showed the mass loss was similar
Aiming to determinate the actual compressive strength of concrete of the bridge, Schmidt/rebound hammer tests were carried, which evaluate the surface hardness of concrete and
A lower decrease of flexural strength is observed when plain 12% resin content polymer concrete are compared to 1 and 2% textile fiber reinforced polymer concrete.. Comparing plain
Mechanical properties, namely, compressive strength, split tensile strength, lexural strength and lexural toughness were studied for high strength concrete reinforced 1 , up to
It can be concluded that, due to the suitable strength and mechanical properties of the waste steel wire reinforced lightweight concrete compared to the plain lightweight
This allows predicting the chloride migration coeficient and total charge passed solely based on their strength class, consequently facilitating the design of concrete
As a conventional reinforced concrete, the ultimate shear strength of SFRC beams without web reinforcement is primarily influenced by: 1) the compressive strength of concrete, 2)
17 that the shear stress between the concrete core and steel tube at the points of steel yielding and initial peak is not influenced by the concrete compressive strength while