• Nenhum resultado encontrado

Structural Analysis of Cavitation for Different Stainless Steels

N/A
N/A
Protected

Academic year: 2017

Share "Structural Analysis of Cavitation for Different Stainless Steels "

Copied!
7
0
0

Texto

Loading

Imagem

Figure 3 reveals the structural analysis at scaning electron microscope of the experimental stainless steels

Referências

Documentos relacionados

If we want to study this phenomenon through the similitude theory, we should previously set the physical proportions that intervene within the evolution of the cavitation phenomenon

The aim of this study was to assess the surface friction produced by self-ligating stainless steel brackets equipped with a resilient closure system and compare the

Thus, the aim of this study was to test the hypoth- esis that there would be no difference in the mechan- ical performance between stainless steel wires and stainless steel wires

Duplex stainless steels, with ferritic-austenitic microstructure, have excellent mechanical prop- erties and corrosion resistance. However, when duplex stainless steels are exposed

In the present work, surface hardness of the plasma nitrided CA-6NM martensitic stainless steel samples was determined by nanoindentation technique, for different

In this work, the inluence of working pressure on the characteristics of the layers produced by the nitriding treatment on the AISI 316 austenitic stainless steel surface using

The adhesion force between the particles of the powdery inorganic materials used in these experiments and the surface of the stainless steel disc increased with increasing

For carbon steels immersed in CO2 saturated solutions at different temperatures, the structure and the composition of corrosion product film formed on the steel surface were studied