• Nenhum resultado encontrado

Induction motor voltage flicker analysis and its mitigation measures using custom power devices: A case study

N/A
N/A
Protected

Academic year: 2017

Share "Induction motor voltage flicker analysis and its mitigation measures using custom power devices: A case study"

Copied!
15
0
0

Texto

Loading

Imagem

Table 1. Short term flicker severity measured for IM 1  and IM 2
Fig. 4: Unity flicker curve for rectangular voltage variation for  P ST = 1
Fig. 5:  A network showing a new underground cable in parallel with existing one.
Table  3.  Comparison of different mitigation measures for flicker compensation
+2

Referências

Documentos relacionados

This paper shows the analysis of torque and current ripple reduction using DTC with discrete voltage vectors involving modification of hysteresis comparators to obtain

Key words: Power system, Flexible AC Transmission Systems (FACTS), static var compensator, thyristor controller series, static synchronous compensator, unified power flow controller,

The electrical power is generated by the induction generator with the help of wind turbine and is transmitted to the grid by the stator winding.. To limit the generator output

On the basis of conducted analysis of studies results was affirmed, that rotate electromagnetic field generated by induction coil fed with frequency of supply voltage

It is Clear that a conventional 3 - level voltage waveform can be synthesize by using the cascaded connection of the two 2 – level inverters.A space vector based PWM strategy for

The Static Synchronous Compensator (STATCOM) [10] is a shunt connected reactive compensation equipment which is capable of generating and/or absorbing reactive power whose output

The mathematical model developed helps to study processes during start and steady-state operation of the pump mechanism driven by means of high-voltage motor and

The conversion efficiency η of solar cells is calculated as the ratio between the generated maximum power, P MAX and the incident power, P IN using Power Voltage