• Nenhum resultado encontrado

Fluid Dynamics and Heat Transfer in Non-Newtonian Annular Cylindrical Solidification of a Binary Alloy

N/A
N/A
Protected

Academic year: 2017

Share "Fluid Dynamics and Heat Transfer in Non-Newtonian Annular Cylindrical Solidification of a Binary Alloy"

Copied!
5
0
0

Texto

Loading

Imagem

Fig. 1.  Alloy annular cylindrical solidification in a graphite mold.
Fig. 2. Evolution of maximum temperatures for  Newtonian and pseudo plastic fluid for     three aspect  ratios: a) R=1.33, b) R=1.77, c) R=2
Fig. 3. Tangential and radial velocity in annular  solidification for R=1.77 and Ra=8.69 x 10 10
Fig. 5. Power index n effect on ψ and θ for Ra = 2.85 x 10 9 .  VI. R ESULTS AND DISCUSSION

Referências

Documentos relacionados

Para conseguir isso, será necessário: (1) expandir o acesso e melhorar a qualidade da educação infantil, como condição prévia para o bom desempenho educacional ao longo da vida

Agora, enfatizamos que, para que ocorra um contrato fiduciário entre enunciador e enunciatário, estes devem estar em uma relação de complementaridade de ideais, ou seja, o

É nesta mudança, abruptamente solicitada e muitas das vezes legislada, que nos vão impondo, neste contexto de sociedades sem emprego; a ordem para a flexibilização como

The fourth generation of sinkholes is connected with the older Đulin ponor-Medvedica cave system and collects the water which appears deeper in the cave as permanent

In the hinterland (Lika region) they are partly permeable but on higher positions at Velebit Mt. calcareous breccias are highly permeable. The best prove for the mentioned is

A reconstruction of the past annual precipitation rates for the last 280 years has been obtained from speleothem annual growth rates, derived from the

A reconstruction of the past annual precipitation rates for the last 280 years has been obtained from speleothem annual growth rates, derived from the distance

Neste trabalho o objetivo central foi a ampliação e adequação do procedimento e programa computacional baseado no programa comercial MSC.PATRAN, para a geração automática de modelos