Dynamic Analysis of Numerical Mesoscale Models of Composite Materials
Texto
Imagem
Documentos relacionados
Modeling of hypoeutectic alloys solidification is a complex problem, because increase of solid phase fraction is triggered by constitution of two structures: In
The iterative methods: Jacobi, Gauss-Seidel and SOR methods were incorporated into the acceleration scheme (Chebyshev extrapolation, Residual smoothing, Accelerated
The resulting very high correlation coeficients in all three analyzed cases (total sample r = .846, sample of boys r = .873, a sample of girls r = .845) indicate a high validity
Power demand of the mixer’s drive reveals the mixer’s operating characteristics and reliable monitoring of the mixing processes involving the evaluation of power consumption
At the first stage of the measurements results analysis, the gear wheel cast surface image was compared with the casting mould 3D-CAD model (fig.. Next, the measurements results
Abstract: As in ancient architecture of Greece and Rome there was an interconnection between picturesque and monumental forms of arts, in antique period in the architecture
Gradually these primary metaphors are transformed into complex metaphors as students learn to separate (abstract) the two domains. The basic-level categorization of angles
Figure 3 : Value of the exciting force recorded during the test and applied in the numerical model (low level chirp input). Figure 4 presents the evolution of the linear error, e