• Nenhum resultado encontrado

J. Braz. Soc. Mech. Sci. & Eng. vol.34 número4

N/A
N/A
Protected

Academic year: 2018

Share "J. Braz. Soc. Mech. Sci. & Eng. vol.34 número4"

Copied!
6
0
0

Texto

Loading

Imagem

Figure 1.  Physical model and coordinate system.
Figure 2. Variation of non-dimensional heat transfer coefficient with Le for  varying S r  and D f  for shear thinning fluids
Figure  6.  Variation  of  non-dimensional  mass  transfer  coefficient  with  Le  for varying S r  and D f  for Newtonian fluids

Referências

Documentos relacionados

Furthermore, numerical results obtained by the proposed hybrid time-Laplace technique, namely, ExGA-Stehfest linear θ method ( N = 10 is employed in all the

We call a posteriori test the evaluation of the results using the RANS (Reynolds Averaged Navier-Stokes) equations coupled with the turbulent model that are

The vertical water entry of a two-dimensional circular cylinder at constant velocity is computed using both linear analytical solution and fully nonlinear numerical

During the second half-time of the bubbles expansion a water film was formed at the wall of the container, which propagated upwards even when the water

negligible and consequently the heat sink overall resistance (Eq. The main objective of this work is to demonstrate that the hollow fin vapor chamber approach leads to

The aim of this paper is the analysis of dam break flows by considering various numerical aspects of smoothed particle hydrodynamics, such as time stepping

Taguchi’s quality loss function approach, a multi-response optimization method, has been employed to determine the best combination values of cutting speed, feed,

In addition, a new approach for the numerical simulation of the Light Resin Transfer Molding (LRTM) process was developed in this work, demonstrating the viability of