Mat. Res. vol.15 número4

In this context, the main goal of this work was to obtain aromatic polyester (APE) nanocomposites from polyethylene terephthalate (PET) and using different concentrations of

Based on the properties of optical burst flows and bandwidths provisioning in the networks, optimal solutions have been discussed related to OBS network architecture employing

In this work the ablative and mechanical properties of quartz phenolic composites were evaluated in order to identify the range of properties suitable for the

Extending these studies, in this work, experiments have been conducted in a spiral plate heat exchanger with hot water as the hot fluid and immiscible two-phase mixtures of

Mechanical property (hardness) and tribological properties (wear and coefficient of friction) were investigated to deduce the optimum manufacturing parameters and

To verify the correlation between the mechanical properties (flexural strength and flexural modulus), and the structural characteristics (number of fibers per mm 2 and

Many in vitro studies have already analyzed the mechanical properties of conventional GICs and res- in-modified GICs used for orthodontic purposes, how- ever, few studies

In this work inject specimens of PCL were photodegraded by exposure to UV-B radiation, and their morphology, thermal and mechanical properties properly analyzed by optical