Lat. Am. j. solids struct. vol.14 número6
Texto
Imagem
Documentos relacionados
Regarding the final vertical displacement of point A, the results of the present cubic and fourth-order elements converge better than the reference finite
The object of the present study is to simulate ballistic impact and improving the strength of the coast guard boat hull while reducing its total weight, by employing shaped
The procedure to calculate impedance functions for foundation embedded in layered medium can be extended to calculate that for the case of half-space medium by using large
In this research, two stress-based finite element methods includ- ing the curvature-based finite element method (CFE) and the curvature-derivative-based finite element method
The dynamic response and failure mechanism of clamped thin alu- minum alloy plates subjected to underwater impulsive loading are investigated by laboratory experiments and
For examples, Bodner and Partom (1972) established a theory of rate-dependent plasticity (or viscoplasticity); Chaboche (1977, 1989) developed a viscoplastic constitutive model
As far as we know, there is almost no optimal adaptive control paper studies the attitude and altitude tracking problem of MIMO nonlinear model of quadrotor in presence of
Numerical results have successfully explained the distribution pattern of perfora- tions on the target namely every surrounding liner is broken into three penetrators during the