Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies

Table 4.7 – Kjeldahl nitrogen and protein content according to three different drying tem- peratures: -, - and - ºC. Hence, for a faster process, the drying temperature

In the same decade, the development of Functional Magnetic Resonance Imaging (fMRI) [13, 104], which measures brain activity using Blood-Oxygen-Level-Dependent (BOLD) contrast,

Inverse microemulsion (IM) method is reported for preparing monodispersed phenetyl isothiocyanate (PEITC) loaded chitosan coated citrus pectin particles, which

The aim of this work is to study the influence of several parameters, such as molar ratio, temperature, reducing agent concentrations, dissolution method and reducing agents in

De- spite the advantageous properties of Poly(vinylpyrrolidinone) (PVP) , the adherence of the semiconductor layer on PVP was very poor, which results in a non uniform and

In partial fulfillment of the requirements for the degree of Doctor of Philosophy in Nanotechnologies and Nanosciences, by Universidade Nova de Lisboa, Faculdade de Ciências

The intention is now to transfer graphene by a wet-transfer to a stan- dard target substrate spin-coated with HSQ (Si/SiO 2 /HSQ/graphene/PMMA), cure the sample and at the same

T HE QUARTZ SAMPLES ALSO INCLUDED AN EXTRA SUBSTRATE ETCHING STEP ( E ). B) SHOWS ALSO SOME PSNP S WHICH WERE NOT TAPE - STRIPPED AND SOME AGGREGATION. T HE BLUE CIRCLES IN