• Nenhum resultado encontrado

Morphological operation based dense houses extraction from DSM

N/A
N/A
Protected

Academic year: 2017

Share "Morphological operation based dense houses extraction from DSM"

Copied!
7
0
0

Texto

Loading

Imagem

Figure 1 The general technique illustration
Figure 2 Flowchart of MM based mask extraction  The smoothed DSM has been morphologically filtered to derive  DTM  and  NDSM
Figure 3 Granulometry and PS using opening-by-reconstruction  2.3 Dome reshaping
Figure 5 The models of the extracted buildings  4. CONCLUSIONS

Referências

Documentos relacionados

Classification and extraction of spatial features in urban areas using high- resolution multi-spectral imagery, IEEE Geoscience and Remote Sensing Letters ,

The method applied for the extraction of the thiabendazole and imazalil residues from lemons was based on the analytical method described for the determination of these fungicides

Automatic detection and classification of damaged buildings, using high resolution satellite imagery and vector data. In: The International Archives of the Photogrammetry,

The in-house software is based on standard procedures for three-dimensional reconstruction of building roofs, as e.g.: LiDAR point cloud filtering for separating ground

It can be observed intuitively from the LiDAR data that the major difference between the vegetation and other on-ground objects (include the tree truck) is

This study assesses the effectiveness of unsupervised classification for urban feature extraction from fusion of imaging spectroscopy and LiDAR data through analysis of

International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XXXVIII-5/W12, 2011 ISPRS Calgary 2011 Workshop, 29-31 August 2011,

(2005) proposed an improved active contour energy function with radial casting initialization, the external energy that creates boundary effects for unstructured buildings