Heat Transfers Enhancement with Different Square Jagged Twisted Tapes
Texto
Imagem
Documentos relacionados
Based on the experimental study, this paper presents the effect of mass flow rate of water, and its inlet temperature for various inclination angles of heat@pipes on heat
A neural network model and a comparison of the model with experimental and CFD simulation results had not previously been applied to predict heat transfer and flow friction of
Experimental and simulation results showed that the thermal performance of nanofluids is higher than that of the base fluid and the heat transfer enhancement increases with
A numerical study of steady state laminar forced and free convective and radiative heat transfer in an inclined rotating rectangular duct with a centered circular tube
This article examines the effect of prolonged time of holding at the temperature of 620 0 C on the processes of secondary phase precipitation and mechanical properties of
Plain fins require a smaller flow frontal area than interrupted surfaces (i.e. offset strip fins and louvered fins) for given values of heat duty, pressure drop, and flow rate, but
9 shows the plot of heat transfer coeicient and Reynolds number for pure water and diferent volume concentration of CuO nanoparticles in water, indicating the enhancement is
For the circular cylinder bank, Figure 9 compares local Nusselt number profiles of the first-row and second-row cylinders (cylinders 1 and 3, respectively, in Figure 3) at two