• Nenhum resultado encontrado

Design and fabrication by inkjet printing of electrodes for electromyography

N/A
N/A
Protected

Academic year: 2021

Share "Design and fabrication by inkjet printing of electrodes for electromyography"

Copied!
102
0
0

Texto

Loading

Imagem

Figure 1.2: Schematic diagram of a single-jet of continuous inkjet printer [8].
Figure 1.5: Piezoelectric inkjet with shear mode. (a) Scheme of a piezoelectric inkjet print head with shear mode
Figure 1.6: Scheme of an ink drop behaviour in contact with (a) a hydrophilic surface and (b) extremelly hidrophobic surface [11].
Figure 1.7: Scheme of the layers involved on the interaction electrode-skin. On the left, ionic characteristics
+7

Referências

Documentos relacionados

Meanwhile, during environmental Regimes two contradictory features have emerged that still confuse some reference authors: on the one hand, these include a sui generis

(A) Sagittal plane, (B) axial plane, and (C) location and nomenclature of 64 electrodes placement which where used in this study. Evolution over the years of studies on

Through questioning the relationship between Singapore’s nation building project and tourism policy, tourist practice is understood in the context of the everyday

Cytogenetic characterization and genome size of the medicinal plant Catharanthus roseus (L.)

A consulta de Fenda Labio-Palatina não é da exclusiva responsabilidade da Estomatologia mas tem lugar no seu serviço pois é a Estomatologia que serve de ligação entre

Analogous to previous studies, these also started by readings in blank conditions to ensure similarity between several samples. These readings showed that even the CI-HME

The main goal of this dissertation was to develop transparent and flexible AZO electrodes using a low cost and fast fabrication method, which takes advantage of laser direct writ-

Several deposition tests were performed using different types of CNTs, dis- persants, papers substrates and deposition techniques, such as spray coating and inkjet