• Nenhum resultado encontrado

Analysis of Composite Laminated Plates using High-Order Shear Deformation Theories: a Meshless Approach

N/A
N/A
Protected

Academic year: 2021

Share "Analysis of Composite Laminated Plates using High-Order Shear Deformation Theories: a Meshless Approach"

Copied!
291
0
0

Texto

Loading

Imagem

figure 12 – Undeformed and deformed section of an edge of a plate in different plate  theories
figure 22 – Convergence studies for the NNRPIM (V1) with different types of plates, Orthotropic plate | a/h = 50 | SSLOrthotropic plate | a/h = 100 | SSL
figure 24 – Nodal meshes used to calculate the  central transverse displacements  represented in figures 19-22
figure  26  –  Relative  errors   (%)  regarding  the  respective  exact  solution  for  the  maximum  normalized  in-plane  and  transverse  shear  stresses  for  a  simply
+7

Referências

Documentos relacionados

for buckling and free vibration analysis of FG plates.The present formulation for FG plates involves less computation compared to full twelve-unknown higher-order shear

In this paper, free vibration of simply supported, clamped and simply supported/clamped magnetoelectroelastic rectangular plates resting on an elastic foundation is investigated

Based on the realistic variation of displacements from the elasticity approach, a new higher order shear deformation theory was proposed for the analysis of an orthotropic

Laminated composite plates, First-order shear deformation theory, Strain gradient notation, Shear locking, Parasitic shear, Finite element method.. On a Four-Node Quadrilateral

Only difference with the calculation of maximum undetectable errors in correlated cases is the use of normalized reliability numbers and since these maximum undetectable errors

In the present paper, a new fifth-order shear and normal deformation theory (FOSNDT) is developed for the bi-directional bending analysis of laminated composite

Acoustic transmission through laminated composite cylindrical shell employing Third order Shear Deformation Theory in the presence of subsonic flow. Investigation of power

Ovesy, HR, SAM Ghannadpour, and G Morada, (2005), Geometric non-linear analysis of composite laminated plates with initial imperfection under end shortening, using