J. Microw. Optoelectron. Electromagn. Appl. vol.16 número1

Index Terms — Equivalent circuit, Parameter value estimation, Manufacturer data, Three-phase induction

The principle of operation of the magnetic geared generator can be understood by considering the operation of the different sub - components within it; that is, the magnetic

(a) Shape of the magnetic flux distribution produced by the Halbach array in the linear motor obtained by numerical analysis; (b) and (c) graphs of the y -component of magnetic

3 - Magnetic flux and polarization measured using the Helmholtz coil for ferrite arc segments.. Methodology applied to evaluate the impact of PM magnetization tolerances on

Suárez, “ Insertion of a sixth parameter in Jiles- Atherton hysteresis scalar model and the method for parameters identification ,” in CEFC 2016 Proceedings, Miami,

Comparison of the reflection coefficient magnitude for experimental and theoretical models when the antenna is on large ground. It is observed that the prototype presents an

5: Performance of the simulated optical system, in which the parameters are extracted from the output signals of the first (1x) and of the tenth (10x) amplifier (design A) of

The photoconductive switch consists of a tiny piece of intrinsic silicon die (highlighted in the up right corner in Fig. 1), which can change its electrical properties when light