• Nenhum resultado encontrado

Rev. IBRACON Estrut. Mater. vol.3 número3

N/A
N/A
Protected

Academic year: 2018

Share "Rev. IBRACON Estrut. Mater. vol.3 número3"

Copied!
8
0
0

Texto

Loading

Imagem

Figure 6 presents a general view of the inite element model gen- gen-erated  by  ANSYS  software

Referências

Documentos relacionados

This study presents the numerical analysis, using a non-linear inite element model, of the structural behavior of reinforced concrete beams externally reinforced with a

This paper aims at the development of a computer program with the methods of Ward [3] and Lawson and Hicks [4] for the design of cellular composite steel and concrete beams,

This work deals with numerical modeling of the mechanical behavior of steel-iber-reinforced concrete beams using a constitutive model based on..

The focal point of this study is the numerical and behavioral evaluation of concrete beams that present geometric imperfections on elastomeric supports and analyze the

The aim of this paper is to conduct a numerical study on the behavior of steel and steel and concrete composite columns in fire, in order to compare their performance based on

Tidal analysis of 29-days time series of elevations and currents for each grid point generated corange and cophase lines as well as the correspondent axes of the current ellipses

A computationally efficient GBT-based beam finite element for calculating buckling (bifurcation) loads of steel-concrete composite beams was proposed, which accounts for shear

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and