Mat. Res. vol.20 número3

In the case of relux samples presenting the phase mixture, the N doping in brookite enhanced the photocatalytic activity in UV and visible light when compared to samples containing

Thus, the purpose of the present work is using the advantage of the phase ield method to characterize microstructurally and kinetically the spinodal decomposition in Al-Zn and

This article presents the cold lat rolling simulations performed by SALF, where the variables of rolling force, efective strain rate, and efective strain were analyzed.. The results

The prepared latex membranes M1, M2, M3, and M4 were characterized by X-ray difraction, SEM, thermal gravimetric analysis (TGA), DSC, X-ray luorescence analysis (EDX), water

sliding distance of 70 m, iber loading of 30 wt.%, a normal load of 10 N, and abrasive size of 200 mm forms an optimum condition for minimum speciic wear rate found at

Samples with dry condition and lubricated with 2HEAF presented close wear rate values (Figure 7), which made of 2HEAF the worst lubricant luid of the studied ones, despite it

Especially, the experimental results indicate that the surface plasmon resonance of Ag nanoparticles and a large negative charge of PO 4 3- ions as well as high separation eiciency

From electrical resistivity measurements, the thickness of 150 nm CrN/Si (100) ilm shown the metal-semiconductor phase transition at around 250 K with energy band gap (E g ) 81 meV in