• Nenhum resultado encontrado

Rev. IBRACON Estrut. Mater. vol.6 número5

N/A
N/A
Protected

Academic year: 2018

Share "Rev. IBRACON Estrut. Mater. vol.6 número5"

Copied!
14
0
0

Texto

Loading

Imagem

Figure 1 – Pile caps with external, embedded and partially embedded socket
Table 1 – Analyzed models in laboratory
Figure 4 – Details of column reinforcement bars
Figure 6 – Concrete casting of pile caps
+7

Referências

Documentos relacionados

In terms of EBITDA margin for the following years, we are once again particularly optimistic, especially considering that the company was able to increase that margin by 30bp in

Os parâmetros considerados, para fins de interpretação da eficiência de extração, foram as frações médias (L) de óleos obtidos nos intervalos de 30; 60; 90; 120; 150; 180; 210

The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of

This paper presents the structural behavior of six reinforced concrete pile caps in rectangular arrangement, considering the ground deformability of pile support, different

The models of the monolithic pile cap and precast pile caps with the roughened conformation of the walls of the socket and the column showed characteristic behaviors of rigid

The strain measured in pile caps tensile reinforcement, the section containing the axis of the pile, there seems to be a great inluence of of the column section because in models

Using the average value of h for AA1350-H24 tested with a 3.175 mm diameter ball (0.128 mm) and the pile-up depths in Figure 5 to recalculate the imi , the lower pile-up depth

A probabilistic capacity spectrum strategy was presented for the reliability analysis of bridge pile shafts with the consideration of the uncertainties in material