Soldag. insp. vol.20 número2

As from an addition of 0,6 l/min 1% of silane in 99% argon, the seam geometry is converging, a further increase does not bring about improvement of the wetting behaviour.. It

The results show that cylindrical fiberglass and ceramic fiber backings not only have excellent refractory properties, but also seal the root opening and contain the weld

Additionally setting the work piece surface constant as the second variable, it appears conceivable hence, to define arc length as the distance between the beginning of tapering

Como resultado del trabajo se observó un aumento considerable de tamaño de grano en la ZAC adyacente a la línea de fusión para todas las condiciones, siendo este efecto más

The angle between the outer edge of the metal drop and the inner edge of the coating crater showed that the polymer increased the intensity of the plasma jet, and the pinch

The dilution displaced the chemical composition of coatings and altered the hypereutectic comprised of primary Laves phase and eutectic lamellar (Co SS + Laves phase)

En general se ha observado que una misma punta requiere un menor tiempo (y por lo tanto un menor consumo de energía) para alcanzar la temperatura de fusión del hilo de soldadura

The objective of this paper is to study the influence of some parameters on the morphology, adhesion and microhardness of thermally sprayed coatings deposited by High