Effect of V and Nb additions on microstructure, properties, and deformability of Ti-45Al-9 (V, Nb, Y) alloy

Analysis of the chemical composition, hardness and wear tests showed that the effect of bead overlapping on coating features is most pronounced in the first and second beads.

Mechanical behavior of the Ti-35Nb-7Zr-5Ta specimens: (a) representative tensile stress-strain curves of solution treated (ST) and cold rolled plus 20 min aged (CRA-20) specimens;

In this paper, we investigated the effect of Nb as a substitutional solute on the mechanical properties of Ti-Nb alloys, prepared in an arc-melting furnace and characterized

Performed tests have shown that application of phosphorus in form of CuP10 and AlSr10 master alloy as an inoculant gives positive results in form of refinement of primary crystals

One poured specimens of the investigated alloy in the following conditions: without vibrations, with 50%ampliture of the vibrations (0,4 mm), with 100% amplitude of the vibrations

Water glass modification with the colloidal solution of ZnO nanoparticles in propanol confirmed the effect of modifier on the water glass wettability of sand

Descriptive statistics for measuring the surface area the primary precipitates of intermetallic phases IM_W\ κ I (Sap_IM_W\ κ I, μ m 2 ) depending on the annealing time ( τ _ia,

The inoculation of yttrium was found to enhance the grain refinement effect of Al-5Ti-1B grain refiner and improve the mechanical properties.. The optimal weight percentage