J. Braz. Soc. Mech. Sci. & Eng. vol.33 número3

The conjugate forced convection and conduction heat transfer from a strip heater flush mounted to a finite thickness wall (substrate) of a parallel plates

It is also worthwhile to analyse the effect of the relative dispersions of resistance and inductance values on the confidence intervals of the responses of passive and

A frequency response analysis was applied to obtain the vertical and angular modal vehicle dynamic response with the excitation of the power spectral density (PSD) of the pavement

Table 2 shows the values of the natural frequency, damping factor and half bandwidth of the vibratory system with different rubber hardness and preload

Based on experimental flow visualization results, three flow patterns were considered to predict the flow: an inlet liquid single-phase region, an intermediary

Free bulging experiments were performed to demonstrate a good relationship with the mathematical model predictions for electrical discharge current in the coil

Keywords: soft tooling process, flexible polymeric mould material, particle reinforcement, cooling time, equivalent thermal conductivity, equivalent modulus of

The present work investigates the use of such pieces of equipment to machine aluminum alloys AA2024 applying high speed machining (HSM) technique, assessing surface