• Nenhum resultado encontrado

Retrieval of tropospheric column densities of NO<sub>2</sub> from combined SCIAMACHY nadir/limb measurements

N/A
N/A
Protected

Academic year: 2017

Share "Retrieval of tropospheric column densities of NO<sub>2</sub> from combined SCIAMACHY nadir/limb measurements"

Copied!
17
0
0

Texto

Loading

Imagem

Table 1. Abbreviations and Variables used in this study.
Fig. 1. Nadir VCD V ∗ for 28 January 2006. The marked area in the Pacific is the reference sector used in this study.
Fig. 2. Stratospheric VCD L derived from integrated limb profiles 27–29 January 2006. Colour-coded disks indicate the location of the tangent points for the individual limb VCDs L, the map shows the interpolated and smoothed field L(d,3,φ).b
Fig. 3. Latitudinal dependencies of V RS ∗ (blue) and L RS (red). Nadir measurements are binned in 1 ◦ bins and displayed as mean (*) and standard deviation (bar)
+7

Referências

Documentos relacionados

The main criteria used for determining the return to sport were comparison of muscle strength alone in the injured limb with the contralateral limb and combination evaluation of

(Fourth panel) SCIAMACHY limb radiance measurements at 500 nm at the tangent height closest to 25 km (blue) and forward simulations (red) using the retrieved aerosol profile and

Table 2 shows the average values of force (N) regarding flexion of the right upper limb (F RUL), flexion the left upper limb (F LUL), internal rotation of the right upper limb (IR

The stratospheric vertical columns derived from SCIA- MACHY limb measurements and Oslo CTM2 simulations differ considerably from total vertical columns obtained over the clean

A proof-of-concept study for the retrieval of stratospheric aerosol extinction from limb scatter measurements was previously pub- lished and the Version 5 data product retrievals

The two points considered at the alternate sides, of the tangents through the diameter of the circle, and then the line joining these points divides the circle

At the first stage of the measurements results analysis, the gear wheel cast surface image was compared with the casting mould 3D-CAD model (fig.. Next, the measurements results

The structure of the remelting zone of the steel C90 steel be- fore conventional tempering consitute cells, dendritic cells, sur- rounded with the cementite, inside of