• Nenhum resultado encontrado

Diesel Engine Convert to Port Injection CNG Engine Using Gaseous Injector Nozzle Multi Holes Geometries Improvement: A Review

N/A
N/A
Protected

Academic year: 2017

Share "Diesel Engine Convert to Port Injection CNG Engine Using Gaseous Injector Nozzle Multi Holes Geometries Improvement: A Review "

Copied!
11
0
0

Texto

Loading

Imagem

Table 1: Natural gas composition [15]
Table 2: CNG as a fuel properties at 25°C and 1 atm [23]
Table 3: CNG characteristics [16]
Fig. 1: Transient gaseous jet structure [33]
+2

Referências

Documentos relacionados

The diesel engine operating parameters was optimized are: compression ratio, injection pressure, nozzle, fuel fraction and additive with four levels of each

The effect of different injection parameters like fuel injection pressure, injection duration, supply voltage to injector and engine speed on the quantity of fuel injected have

The problem studying in this work is to detect cylinder imbalance in operating medium-speed six cylinder diesel engine by using combustion pressure variation and correlating

The same mesh was later used to perform a simulation with a defined needle lift curve (and hereby the mesh movement) and inlet and outlet pressure1. In next few steps we

Por último, quanto à questão relativa à crise do sistema de proteção social, destacaram-se os aspectos condizentes: à proposta central do ideário neoliberal, fundamentada no

The performance parameter such as Brake Thermal Efficiency (BTE) and brake Specific Energy Consumption (BSFC), combustion parameters such as cylinder pressure,

For example, Shashikanta [6] , studied a 17 kW, stationary, direct injection diesel engine has been converted to operate it as a gas engine using producer-gas and

( 1993) Engine control - Ignition/fuel injection management, petrol and diesel. A comparative study of pulsed jet ignition. New gas mixer for gas engines - Optimized