• Nenhum resultado encontrado

COMPÓSITOS POLIMÉRICOS REFORÇADOS COM FIBRAS DE SISAL RESUMO

N/A
N/A
Protected

Academic year: 2019

Share "COMPÓSITOS POLIMÉRICOS REFORÇADOS COM FIBRAS DE SISAL RESUMO"

Copied!
13
0
0

Texto

Loading

Imagem

Table 1.  Properties of some natural fibers (Mukherjee & Satyanarayana, 1984)
Figure 3. Schematic sketch of a sisal fiber cell with approximate dimensions (Gram, 1983)
Table 3. Variation of tensile properties of sisal fiber with test length (diameter of fiber: 200 µ m), (Mukherjee &
Figure 4. Work of fracture of natural fiber composites plotted against microfibrillar angle of the fibers (Pavithran et al., 1987)that of polyester resins (34 - 41 MPa)
+3

Referências

Documentos relacionados

Specializing to the case in which the user cost of the interest-bearing asset is constant, we have provided conditions under which the use of unidimensional formulas can lead

The probability of attending school four our group of interest in this region increased by 6.5 percentage points after the expansion of the Bolsa Família program in 2007 and

Foram fabricados corpos de prova de matriz pura, compósitos reforçados por sisal, variando-se o comprimento das fibras, compósitos reforçados por pó de maçaranduba e compósitos

Em torno do quarto dia após a ovulação, quando o folículo dominante tem aproximadamente 10 mm de diâmetro, ocorre a transição da dependência de FSH para LH (divergência),

Reforça-se assim a importância do sentido do número defendendo que, desde o jardim-de-infância até ao final ao ensino secundário, deve-se possibilitar a todos os alunos uma

4.8 Diagramas de extremos e quartis dos estimadores da fun¸c˜ao de sobrevivˆencia bivariada quando a percentagem de censura ´e alta e a correla¸c˜ao entre intervalos de tempos

Dessa forma, para além das medidas de reação à pandemia de Covid-19 no Brasil e do conjunto de políticas adotadas pelo atual governo, propomos examinar o processo de avanço

The future competition against the glass fiber, as possible reinforcement of structural composites, depends on the improvement of both the polymer matrix adhesion and the