• Nenhum resultado encontrado

Mat. Res. vol.17 número6

N/A
N/A
Protected

Academic year: 2018

Share "Mat. Res. vol.17 número6"

Copied!
8
0
0

Texto

Loading

Imagem

Figure 2. Boundary condition and dimension of problems.
Figure 3. The Deformed shape and opening crack of the inite element mesh.
Figure 6. Normalized contact stress distributions computed for various values of the coeficient of friction by considering a lat punch:
Figure 7. Normalized stress intensity factor distributions generated by considering a lat punch: (a) mod І for (a-b)/d=10, υ=0.28; (b)  mod П for (a-b)/d=10, υ=0.28; (c) mod І for b=0, υ=0.28; (d) mod П for b=0, υ=0.28.
+3

Referências

Documentos relacionados

Contra-indicação, segundo a FDA, constitui a descrição de uma situação na qual o fármaco não deve ser utilizado, porque apresenta um risco que pode

If both parties act in a trustworthy way and have no opportunistic behaviors, trust between both parties will be enhanced, in which case, excessive use of formal

Figure B.2: Storage modulus (E’) and loss modulus (E’’) curves versus temperature, obtained by DMA on a amorphous lactose-trehalose sugar system, hydrated under a a w of 0,00

Aprendizagem ativa significa aprendizado dinâmico, no qual, por meio de atividades baseadas em projetos, colaborativas e centradas em soluções de problemas, os

Keywords: bonded composite repair, adhesive, thermal stresses, stress intensity factor, inite element method... thermal expansion properties of the composite patch and the

Figure 4. Microstructure of the heat afected zone corresponding to the root pass: a) austenite, ferrite, sigma phase and secondary austenite; b) austenite, ferrite and sigma

No entendimento da actual perspectiva da educação em ciências, o professor ajuda o aluno a adquirir conhecimentos científicos, quer sejam de natureza declarativa, quer sejam

Since the specimen was calibrated so that the fracture energy release rate and the complex stress intensity factor can be calculated when specimen diameter,