• Nenhum resultado encontrado

REPOSITORIO INSTITUCIONAL DA UFOP: Computational and physical simulation of fluid flow inside a beamblank continuous casting mold.

N/A
N/A
Protected

Academic year: 2019

Share "REPOSITORIO INSTITUCIONAL DA UFOP: Computational and physical simulation of fluid flow inside a beamblank continuous casting mold."

Copied!
11
0
0

Texto

Loading

Imagem

Fig. 1. (a) Schematics of 1:1 beam blank model of a mold; (b) isometric view of the beam blank with one nozzle; (c) beam blank dimensions; (d) cross section of beam blank depicting cutting planes AA, BB, and CC.
Fig. 2. PIV (Particle Image Velocimetry) according to DANTEC ® . Source: http://www.dantecdynamics.com/measurement-principles-of-piv
Fig. 5. Velocity vector plot from CFD for flow rate of 125 L/min (a) section AA, nozzle type 1; (b) section AA nozzle type 2; (c) section BB nozzle type 1; (d) section BB nozzle type 2.
Fig. 6. Velocity vector plot at the meniscus region for liquid flow rate of 125 L/min: (a) type 1 nozzle and (b) type 2 nozzle.
+7

Referências

Documentos relacionados

This work focuses on the fluid dynamics of the mold filling proc- ess and on the analysis of time and filling behavior. A computational tool was developed, which utilizes the

6 suggest that for a fixed blood flow rate, the dependence between the final temperature of the fluid inside the endometrial balloon and the depth of the affected

por nós empregados indistinctamente, porque os consideramos synonymos; sendo certo todavia, que julgaríamos este ultimo preferível, visto qne d'esse modo se evitaria toda a

For Scheme 3 ( Fig. 2 ), which corresponds to the layout of a cross flow grain dryer with three drying stages ( Fig.. net/devpascal.html ) and consists of tools for geometry

This moment is produced by the actuator which is mounted over the beam and rotating with constant angular

(In Portuguese).. K., Mathematical modelling of single and multi-strand tundish for inclusion analysis, Applied Mathematical Modelling, v. K., On the application of

Nesse capitulo são apresentados os resultados obtidos junto ao gestor de uma indústria e comercio de vidros temperados, em estudo de caso realizado em setembro de 2018,

A computer simulation of heating and cooling liquid food during sterilization process using computational fluid dynamics. Numerical simulation of natural convection heating