J. Braz. Soc. Mech. Sci. & Eng. vol.34 número3
Texto
Imagem
Documentos relacionados
The vertical water entry of a two-dimensional circular cylinder at constant velocity is computed using both linear analytical solution and fully nonlinear numerical
negligible and consequently the heat sink overall resistance (Eq. The main objective of this work is to demonstrate that the hollow fin vapor chamber approach leads to
Taguchi’s quality loss function approach, a multi-response optimization method, has been employed to determine the best combination values of cutting speed, feed,
Metal cutting operation was performed at eight different rake angles, three various cutting speeds and cutting depth for the experimental work done about the
In this paper, genetic algorithm based artificial neural network hybrid prediction model is proposed to foretell surface roughness and tool wear.. A multiple
Flexural-Torsional Vibration Analysis of Axially Loaded Thin-Walled Beam The present paper considers the flexure-torsion coupled vibrations of axially loaded thin- walled beams
Determining the Viscous Behavior of Non-Newtonian Fluids in a Flume Using a Laminar Sheet Flow Model and Ultrasonic Velocity Profiling (UVP) System.. The flow of non-Newtonian
Babadagli (2003)), generally to decrease the viscosity of the fluid and reduce the pump power to extract the oil. Its shear-thinning behavior and the fact that it has