Effect of compound field on horizontal continuous casting of Al-1wt.%Si alloy
Texto
Imagem
Documentos relacionados
The basic problem (4) for the arbitrary assumed value of boundary heat flux q ( x , t ) and the additional problems (20) associated with the sequential function specification
Previously, the effect of crucible configuration details, such as segment shape, slit number, height/diameter (H/D) ratio and wall thickness, on magnetic field
primary dendrite spacings as function of cooling rate during upward, downward, and horizontal directional solidiication of Al-7wt.%Si alloy. It can be seen
'Lollipop' type samples of Ultra Low Carbon steel were collected in the tundish sequence’s irst heat of the Continuous Casting in the three different processing conditions
Effect of the temperature gradient, growth rate, and the interflake spacing on the microhardness in the directionally solidified Al-Si eutectic alloy.. Journal of
Modelling and Optimization for Heat Treatment of Al-Si-Mg Alloy Prepared by Indirect Squeeze Casting Based on Response Surface Methodology.. Liwen Chen a , Yuhong Zhao a *, Zhiqin
In this study, we investigate the efect of physical properties on the phase-ield model, i.e., the phase-ield mobility is evaluated with diferent values of
We analyze the onset of classical behaviour in a scalar field after a continuous phase transition, in which the system-field, the long wavelength order parameter of the model,