• Nenhum resultado encontrado

Effect of compound field on horizontal continuous casting of Al-1wt.%Si alloy

N/A
N/A
Protected

Academic year: 2017

Share "Effect of compound field on horizontal continuous casting of Al-1wt.%Si alloy"

Copied!
6
0
0

Texto

Loading

Imagem

Figure 1 shows the schematic diagram of the experimental  apparatus, which mainly consists of the ultrasonic vibration  system, the traveling magnetic system and the horizontal  continuous casting system
Fig. 4: SEM photographs of the  fracture of tensile test  specimens: (a) without any  ield, (b) with magnetic ield,  (c) with ultrasonic ield, (d)  with compound ieldFig
Fig. 6: Effect of compound ield on distribution of Si element: (a) without any ield, (b) with  magnetic ield, (c) with ultrasonic ield, (d) with compound ield

Referências

Documentos relacionados

primary dendrite spacings as function of cooling rate during upward, downward, and horizontal directional solidiication of Al-7wt.%Si alloy. It can be seen

'Lollipop' type samples of Ultra Low Carbon steel were collected in the tundish sequence’s irst heat of the Continuous Casting in the three different processing conditions

Effect of the temperature gradient, growth rate, and the interflake spacing on the microhardness in the directionally solidified Al-Si eutectic alloy.. Journal of

Modelling and Optimization for Heat Treatment of Al-Si-Mg Alloy Prepared by Indirect Squeeze Casting Based on Response Surface Methodology.. Liwen Chen a , Yuhong Zhao a *, Zhiqin

In this study, we investigate the efect of physical properties on the phase-ield model, i.e., the phase-ield mobility is evaluated with diferent values of

We analyze the onset of classical behaviour in a scalar field after a continuous phase transition, in which the system-field, the long wavelength order parameter of the model,

The basic problem (4) for the arbitrary assumed value of boundary heat flux q ( x , t ) and the additional problems (20) associated with the sequential function specification

Previously, the effect of crucible configuration details, such as segment shape, slit number, height/diameter (H/D) ratio and wall thickness, on magnetic field