Physical Properties of Wood from Steamed
Texto
Imagem
Documentos relacionados
resinifera wood through physical and mechanical assays and wood anatomy studies and ii) determine relationships between wood properties, such as specific gravity,
Test specimens were prepared for physical and mechanical properties (Table 1) according to the Brazilian Standard, NBR 7190 (1997).. For each property studied, moisture content
ABSTRACT: This work aimed to evaluate the physical and mechanical properties of particleboard panels manufactured with wood particles from Sequoia sempervirens and Pinus taeda
3.1 Physical and chemical properties of wood particles The particles obtained from furniture discards presented a mean value of density bulk of 0,178 g/ cm³, lower than the
The average values of the modulus of elasticity (MOE) and wood strength of clear wood samples (without knots) compared to wood samples with knots, within the different size
The main objective of this study was to evaluate the physical-mechanical properties and the structural classification of the wood from young (15-year old) guapuruvu (
Due to the economic importance of charcoal as a bioreducer and aiming to provide additional information about different Eucalyptus hybrids used in the steel industry in
The clones’ interaction with the longitudinal position was not significant for the variables of wood basic and apparent relative densities, high heating value and energy density,