Science Arts & Métiers (SAM)

Glass transition and physical aging of PLA, PLA/ZnO_r and PLA/ZnO_s nanocomposites The impact of the two types of nanoparticles on the polymer re- laxation phenomena was probed by

The tests have shown a reduction in the cutting force, and have highlighted the impact of laser assistance on the integrity surface roughness, appearance, residual stress and the tool

CONCLUSION The Polynomial Chaos Expansion has been successfully applied to Finite Element electromagnetic field simulation to evaluate the impact of material properties uncertainties

3.Microstructure changes in austenite and ferrite during aging of AISI 316L SEM examination: a Decomposition ofdferrite after aging for 1 000 h at 550C; b Decomposition ofdferrite after

3, a material model to predict theflow behaviour of the Inconel 718 should consider strain hardening up to a strain level of ~ 0.26 followed by a strain softening range where stress

It can also be seen that the higher fatigue strength of the 45°-B1 batch compared to the 90° batch is not in agreement with the pore size distributions measured on polished samples of

This aging, added to the melting by recycling process could have implied a transformation in the F I G U R E 4 Loss modulus evolution of the waste blends

Effect of build orientation and post‑curing of methacrylate‐based photocurable resin fabricated by stereolithography on the mechanical behavior from quasi‑static to high strain rate